20 Most Recent
2000 BMW 323 Questions & Answers
Torque for 2000 323 bmw rear wheel bearing
There is really no torq setting for a wheel bearing, do it up till there isn't anymore movement in the wheel, make sure you have plenty of grease too, it's relatively a easy job to do, good luck
12/29/2014 5:43:19 AM •
2000 BMW 323
•
Answered
on Dec 29, 2014
What the synonym and the antonym for Grimace?
Hi Luis:Here the definition: scowling facial expressionSynonyms: face, frown, moue, mouth, mouthing, mug, scowl, smile, smirk, sneer, wry faceAntonyms: grin, smile Hope this helps; also keep in mind that your feedback
is important and
I`ll appreciate your time and consideration if you leave some
testimonial comment about this answer.Thank you for using FixYa, have a nice day.
4/29/2013 9:44:04 PM •
2000 BMW 323
•
Answered
on Apr 29, 2013
Whats wrong if my bnw323i gas hand speed or dash
"What is wrong" would be an electrical sytem malfunction that would need to be properly diagnosed and repaired....special tools, equipment, service information and knowledge of the system will be required.
5/26/2012 6:00:10 PM •
2000 BMW 323
•
Answered
on May 26, 2012
Just got there codes for my 2000
P0304 = #4 cylinder misfiresP0170 = Fuel Trim, Bank-1
P0173 = Fuel Trim, Bank-2P1250 = this is invalid code for BMW
P1188 = Fuel control, bank-1, sensor-1 (pre-cat sensor)
P1189 = Fuel control, bank-2, sensor-1 (pre-cat sensor)Vacuum leaks and/or sensor defective for the issues of the codes.This error codes really need parts to replace. But you have to replace the thermostat first. Then clear the codes and see if any reappears,then replace defective part/s
5/1/2012 7:48:06 AM •
2000 BMW 323
•
Answered
on May 01, 2012
Need to find parts for
i find that dealers and car parts stores are the best place to find car parts. go to google and search for car parts and you will get millions of links BMW parts should still get thousands.
Re: 2000 BMW
make sure all of your tires match (same brand and size) . Also if one tire is significantly more worn then the others, it can cause this as well. When you rotated and balanced your tires, did you replace just one? If so, and the others aren't close to new, it will cause this.
I've been having a reoccurring
Have you had the codes read? I would at this point suspect a faulty sensor which is breaking down when hot. Crank or cam sensor likely.
Not finding what you are looking for?