20 Most Recent
2010 Chevrolet Malibu LS Questions & Answers
Location of EGR valve
Your vehicle doesn't have an EGR valve ! How did you come up with this code ? A code reader ? You need to have a factory scan tool if you want to see proper codes . Your vehicle has -
The camshaft position (CMP) actuator system is an electro-hydraulic operated device used for a variety of engine performance and operational enhancements. These enhancements include lower emission output through exhaust gas dilution of the intake charge in the combustion chamber, a broader engine torque range, and improved fuel economy. The CMP actuator system accomplishes this by changing the angle or timing of the camshaft relative to the crankshaft position. The CMP actuator simply allows earlier or later intake and exhaust valve opening during the four stroke engine cycle. The CMP actuator cannot vary the duration of valve opening, or the valve lift.
That P0401 is a generic code , you need factory tool for factory enhanced DTC'S !
II have a 2010 chev malibu the heat and cooling fan does not work
Check for power at the fan resistor wire to the resistor, if power. change the resistor block itself. it controls fan speeds. Most resistors are beside the blower fan, below glove box. You may have to remove a panel to get to the fan resistor. check all fuses first! Even under hood fuse box.
Not finding what you are looking for?