20 Most Recent 1998 Chevrolet Venture - Page 8 Questions & Answers

CHECK BULB

servo switch the main switch needs replacement as long as it didnt come off the track now if you want your window to go up till fixed power jump the switch this is scarey part find a power line and connect window should go up but you have to pull switch out to do this

thats a tough one it's got to be a draw it could be anything

Could possibly be head gasket, and hopefully not a hair line crack in the block.

possibly bad switch or bad motor.

hold the window switch in a desired direction and observe the dome light. if it dims you have a good switch but a bad motor. also with the switch depressed bang on the door inside to jolt the motor. often begins working but needs replacement at a later date.

Very low details.Bad battery/connectors.Bad alternator charge rate.Battery end of life/manutenance needed.If a jump start or another battery won't solve the problem u need to track it.Spark condition (if apply)/fuel condition. Best guess: jumpstart/new battery hold accelaration to the floor and crank it.Cheers.hope u deal it,share.

Take the battery and have it load tested. Most places that sell car batteries can do this for you. The battery may not have the amperage to start the vehicle even though it has the proper voltage.

Immo will let u crank even with a blind key.The car may run with a push ,risky manouver,as it may loose the alignement.The starter may be shortcuted to crank manualy (with a screw or a bypass) do u know what I am talking about?In order to track/diagnose the problem.

In most cases the wiper motor itself fails and needs to be replaced, this isn't a easy repair considering the amount of things that need to be removed to get the entire wiper motor and transmission assembly out together. Now if there is also issues with anything else on the wiper / blinker / cruise control switch, you may need to replace the wiper switch assembly on the column.

Some times the PVC valve line will have a leak ir crack in it which causes the positive ventilation control valve to chatter rapidly , this is easley mistaken as a idler or ac belt noise.

Please be more specific.

-Check fluid level at temperature.-If low top it to full level.Mai

it's number 9 and 10 have a look to those relay function

replace it

year make model and engine size?which window switch? I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa