2007 Chrysler 300C - Answered Questions & Fixed issues
How to change abs pump motor
the ABS pump is in the engine bay .it has a lot of small metal brake pipes on it. but your relay will fail before that part will fail .change the relay first.
12/21/2013 11:20:29 AM •
2007 Chrysler...
•
Answered
on Dec 21, 2013
•
100 views
Cruise control wont engague
The speed control system is controlled through the main on board computer called the PCM, in order to determine the cause you must have the system scanned for fault codes. soooo.. off to the dealer.
Chrysler 300c where is the door opener relay controller located?
2007 Chrysler 300C:
The majority of electrical system fuses and relays are housed in the two Power Distribution Centers (PDC). One is located in the engine compartment, combined with the Front Control Module (FCM) to form the Integrated Power Module (IPM). The PDC is located next to the battery in the rear of the vehicle. The PDC located next to the battery is replaced only as part of the body wiring harness.
My 2005 chrysler 300 ac worked great one day and just hot air the very next day
May need to be charged. Do you hear the compressor coming on? If not, put a gauge on the low pressure port to check pressure. If low, add r134a until pressure is normal. If system requires frequent refills (more than once per year), have it tested to find the leak. If the compressor is coming on, the problem may be the blend door not actuating properly.
Not finding what you are looking for?