20 Most Recent 2009 Dodge Nitro 3.7 Questions & Answers

Question edited for clarity. Question moved to model category.

How do i reset the Dodge Nitro anti theft?

Vehicle History https://www.vehiclehistory.com > questions > how-do-... With the key still in the run spot, wait 10 minutes, and the safety light will flash and then go out. Turn the key off and wait for 5 seconds. 8 answers · Top answer: The anti-theft system on the Dodge Nitro was not designed to be reset by the owner and requires software for a hard reboot that can only be acquired through ...

• How do i perform the 2010 Dodge Nitro anti theft reset?

  https://www.vehiclehistory.com > questions > how-do-... To reset the 2010 dodge nitro anti theft system put the key in the driver's side door lock, unlock the door, lock the door, then unlock the door again. Like. (7).

How to reset the anti theft - DodgeForum.com

Dodge Forum https://dodgeforum.com > ... > 3rd Gen Ram Tech Apr 6, 2019 - With the key still in the run position wait 10 minutes and the security light should blink and then go out. Turn the key off and wait 5 seconds. Which fuse is it to reset the computer?? Apr 10, 2017 Permenantly disabling the alarm. Aug 1, 2018 More results from dodgeforum.com

Red security light stays on and I can't start my 07 nitro

JustAnswer http://www.justanswer.com > Dodge Repair Dec 26, 2016 · 1 answer you cant reset them this is a common issue with dodge vehicles the wireless control module has gone bad. it wraps around the ignition cylinder ...

for the best solution of your problem visit this site Best Manuals

Fuel pump possibly, need more info.

Could be your brake worn out or e-brake.

you ck the light bulb

what type of car have you some cars require special types of oils to run

Ignition switch....then the manufacturer specific codes have to be cleared by a high end tech or dealer, your harbor freight tool won't do it

If your vehicle with a Nitro engine is not upshifting and you're getting a P0750 code, it indicates that there is a problem with the shift solenoid "A". This solenoid is responsible for controlling the hydraulic pressure inside the transmission that helps to activate the clutches and bands that are responsible for shifting gears. There are a few reasons why the shift solenoid "A" may not be functioning properly, which could lead to the transmission not upshifting. These reasons include:

1. Malfunctioning Shift Solenoid "A": The shift solenoid "A" could be faulty, stuck, or damaged, preventing it from functioning properly.
2. Wiring Issues: There could be issues with the wiring or connections leading to the shift solenoid "A," which could cause it to malfunction.
3. Low Transmission Fluid: If the transmission fluid is low or dirty, it could prevent the shift solenoid "A" from functioning properly, causing the transmission to not upshift.
4. Internal Transmission Problems: There could be internal problems within the transmission, such as a clogged valve body, damaged transmission bands, or worn clutches, which could cause the shift solenoid "A" to malfunction.

It is recommended to take your vehicle to a certified mechanic or dealership to diagnose and repair the issue, as transmission issues can be complex and require specialized knowledge and equipment to fix properly.

Likely inside fuel tank

You need to have the BCM (body control module) scanned for faults. This requires a dealer level tool.

The cruise is not fused separately.

There's a website that has all this information about all this and manuals everything totally free there are many actually but I personally like few .. let me know if u need help thanks