20 Most Recent 2009 Ford Edge SEL Questions & Answers

Your temp switch is most always located in the intake or head and close to the thermostat housing.

I have had the same smell since I owned the Edge and accidently came upon an easy cure! My mechanic put a very cheap, very thin cabin filter in, instead of the very thick allergy type that was in it. Apparently the thick filter does not allow for evaporation and mold/must grows. I prefer the kind that filters pollen, etc., but will go with this very thin one from now on. Absolutely no more weird smell and it's been two months. First time since I owned the car. It definitely was my problem. Try it!

is it a manual sliding valve or a computer regulated temp valve ? could also be the temp gauge.

2022, 6,000 miles and brand new. Sort of bull, but not. The code tells the problem, but once the engine malfunction light go out, it is lost to the driver. However, all codes should be listed historically hiding in the background of the ECM that can be read with a pro grade scan tool computer, the sort that cost $3,500 to $5,000. These scan tools can also record what happens in real time. The dealership needs to keep it, drive it and record when it happens. If it only happens for a couple of seconds, you are not going to be able to catch it but they should be able to access those stored codes. If you are anywhere near Tennessee, reach out to Scotty Kilmer on YouTube. He loves calling out the likes of Ford for shoddy workmanship. He also has a number of those pro grade scan tools.

Check this out.https://www.autoserviceprofessional.com/article/95758/gtdi-wastegate-issue

This link will show you what it look like and where it is located good luck. https://www.rockauto.com/en/moreinfo.php?pk=8055360&cc=3310415&jsn=9

check for faulty spark plugs. if not then throttle body cleanup and fuel injection cleanup. if not check Clutch

You just go to the link below, I'm sure you will get the solution of your problem https://www.reliable-store.com

14-16 lbs. torque Torque the inner bolts first and work out to the front and rear bolts last.

I had the same issue on my 2013 Edge. Deleted the password expecting it to let me enter a new one. Since the password is unique to vehicle and not able to be deleted I went into the SYNC computer settings and reset to original settings. This takes a minute. The screen goes black. Opening the door or turning key off is not suggested. Resetting the in dash computer(sync) is the fix for deleting the original door key code.

My personal suggestion would be to go for these repair catalogs. I know this website www.reliable-store.com that i used to get manuals from, and they have all models online. I also brought for my 1989 BMW, such old model, they had it and it was very good manual. Go ahead, I bet.

Don't you have any other repair shops in your area. A local independent repair shop an not a chain store type , like pep boys or firestone , monroe muffler an brakes etc..... The switch could be the problem , but without testing that's just a guess . The thing to do would be to use a digital volt meter an test the circuitry into the an out . B+ power and ground . There are videos on youtube , testing electrical stuff on cars . Basic Electricity for Service Techs Ohm law Current Flow Opens Shorts How to Use Multimeter Beginner Crash Course Check out some more videos . You can find wiring diagrams at http://www.bbbind.com/free_tsb.html