2005 Ford Fiesta 1.6 - Answered Questions & Fixed issues
Fiesta duratec 2005 Abs warning light on
Whenever the ABS module turns on the ABS light in the dash it is to alert you to the fact that a fault has occurred in the ABS system and the control module has turned off the ABS brake control, you now have regular non ABS brakes. The waring light will stay on until the fault is corrected. Since a large number of problems would cause this you must get the control module scanned to retrieve the fault code that was set in the control modules memory when it turned on the light. Once the fault code is known the process of diagnosis and repair can begin.
2008 1.25 Zetec. Why do clock/date & trip counter zero approximately 30 minutes after ignition is switched off?
first car?
that all newer cars have this key off feature.
and now KEY less? starts? (as in no metal key slot?)
the owners users guide in the glove box covers this.
titled, power off accessory delay feature. 10 to 30 minutes mostnewer cars have this A FEATURE.
if inside car see this delay timer end, open driver door power off delay ends. (proof it is this)'
this feature prevents draining car battery dead and now stranded with hug towing bill.
I can see all there in totality, to just be sure.....
or is this. (if it loses time on clocks)
a fuse is blown. stand-by memory fuses.
cars have many, now. for each computer on board.
check all fuses.
can I assume car drives great?????
and scan tool scans show no DTC errors>?
some newer a cars now have newer feature to bring back , KEY ACCESSORY mode. now missing with autostart buttons no metal key, so read the users guide for that. (some have this longer start button push rule)
what's next clap on , clap off cars?
2012 Fiesta. Why don't wipers and power door locks work?
https://ibb.co/cNnLhdZ
Click on the link for diagram
You can check those fuses at the top, they go hot with key on. At the wiper motor, you can see hi and lo speeds and the wire colors, that's voltage. That solid black wire is ground. You might be able to take wire connector loose from motor, use jumper wires off the battery for voltage and ground to motor to see if it will run? You might should use an inline fuse, just in case. Do testing before you replace anything. Also, the are trouble codes for wipers, manufacturer specific codes.
Not finding what you are looking for?
