20 Most Recent 2005 Ford Freestar Cargo Questions & Answers

P0402 is an OBD-II generic code that the engine control module (ECM) has detected indicating the engine exhaust gas recirculation (EGR) valve is flowing too much recirculated exhaust gases when it is commanded to open the flow of gases into the intake manifold.

It really sounds like you have a front wheel bearing that has gone out. This would make the anti-lock system fail so you would have a brake light indicator on.

lock the drivers door and then unlock and enter and try to start.

The wiring will be broken in the rubber accordion between the body and the door.

these type of problem is very rear but i think just visit the link and you will get the solution http://toolsnyou.com

Do you have the correct motor mount ? Did you compare the old one with the new mount ? What exactly is the problem when installing the new mount ?

The one farthes away from the master cylinder

Check owners manual

Inside the alternator.

The knock sensor is installed in the lower forward area of the block on an OHC V6 engine. I believe another option to the knock sensor is the "Mass Air Flow Sensor" That would be easy to see from the top side of engine on the Air Inlet tube on the Throttle Body.