Top 20
2007 Hyundai Getz 1.4 - Page 5 Questions & Answers
My 2007 Hyundai Elantra is having electrical issues the alternator checked they said it was ok but my lights blink when on
When you say "they," do you mean a mechanic or shop that tested the charging system before confirming it's okay?*Check the tensioner on the alternator belt. The tension could be loose, causing a problem charging the car to the PCM's satisfaction.*Also check the alternator/serpentine belt for cracks. If it has cracks along the length of the side with the teeth, replace it. *Another thing to check is the terminals on the battery. Make sure there's no corrosion on them and that the cables are securely tightened.
2008 Hyundai Accent automatic transmission, goes into reverse but no forward driving gears
This could be due to a variety of reasons such as a faulty shift solenoid, internal mechanical failure with the transmission, or an issue with the transmission fluid.
It's possible that the car's transmission was damaged when it was stuck in the snow drift. The slight pause shifting from reverse to drive that you mentioned earlier could also be an indication of a transmission problem. I would recommend taking your car to a qualified mechanic to diagnose and fix the issue. You might get lucky-- but without a visual inspection, you may just hear the intimidating prognosis of a transmission problem.
In the meantime, you can try holding your left foot on the brake while you shift into reverse. Then, as soon as you feel the transmission engage, gently depress the gas pedal with your right foot. This will eliminate the forward roll problem .
Hyundai Elantra 2008 car problem NEED HELP !
Shoddy workmanship.
Never leave an item with a fastner missing!
I would get the belt path aligned first and then fit a new fan belt ensuting all fastners are in place and torqued to factory specification.
2011 Hyundai Elantra New transmission but vehicle runs in limp mode intermittently
As my old dad used to say "they must have seen you coming"! Are you, young, female, blonde and cute? :>D
Engine tick is caused by play in the valve lifters and is an easy repair. It may have been the timing chain, but.... "Elantra's new, maintenance-free silent timing chain enhances engine durability while reducing noise." In normal circumstances, tick is not a reason to put in a new engine.
It sounds like your issue is bad connectors to the ECU. They spraying the connectors with electrical switch cleaning spray.
If that doesn't work, you need a good auto electrician with a professional grade scan tool computer to diagnose the issue. These computers can record exactly what happens to put the vehicle into Limp Mode.
https://www.google.com/search?q=auto+electrician+near+me
..
2010 Hyundai Santa Fe what cause the alternator not to charge?
Hi Joe
It is sort of a guess, but your headlights are powered from the battery and cause a drain when on, so the regulator provides extra volts to compensate the battery charge being depleted.
Except your question heading says 'not to charge'. The question body says 'why the alternator is charging when I turn the headlights on'? Should that be 'why the alternator is NOT charging when I turn the headlights on? If that is the case, you need an auto electrician.
Hyundai Atos 2000 one of the front wipers not working.
Try this test. With the key OUT of the ignition stand outside the vehicle, reach out and try to move the broken wiper blade by hand. Does it move with no resistance? Does it feel like 'clicking' as you move it? Does the other wiperblade move slightly as you move it or does it not move at all?
This will help work out if it is the wiper arm slipping on it's drive spindle or if the problem is deeper down underneath in the rods and arms moving the wiperblades. Please comment below with this information and I'll try to help you more.
2003 Hyundai Santa Fe has no spark.
Are there any warning lights on the dashboard? Did you get the new ECM programmed to the vehicle? The ECM needs to be coded to your car so it knows which systems are fitted to your vehicle. Have you plugged it into an OBD diagnostic to check for trouble codes?
Not finding what you are looking for?