20 Most Recent 2005 Kia Sorento EX Questions & Answers

Try giving the stering wheel a pull or push whilst turning the key ,the lock is into the wheel and its needs releasing thats all ,ask a man to do it for you

This information should be in the owners manual that came with the car.

Check for a coolant leak.

http://www.obd-codes.com/p0134 P0154 02 Sensor No Activity Circuit

May have a cooling fan that has malfunctioned mounted on the radiator. Check under the hood for a fan or two mounted on the inside or outside the radiator. If you find one or two, start the car and let idle watching for fan(s) to kick on when thermostat gets hot.

You can get diagrams from a dealership sometimes if you ask nice they will photo copy one out of the book. Most of the relays inside your car are behind the fuse box. Remove the knee bolster and look behind the interior fuse box they pug into the back of it.

it may sound stupid but if the air filter is dirty it wont get enough air so it will shake badly telling you for experience

I am sorry but we have no wiring diagrams here at fixya.

In the link and a video as well. NOTE: they are POUND INCH not Foot Pounds.

Torque Pattern for Valve Cover? - Kia Forum

kia-forums.com https://www.kia-forums.com > threads > torque-patter... Sep 17, 2013 - show the locations of the bolts on the "Cylinder Head Cover" --aka valve cover-- and they provide the torque at 35-52 lb-in (4-6Nm), but they ... Valve Cover Gasket help Apr 28, 2012 Torque specs and sequence for intake bolts Jul 10, 2022 Need Bolt Pattern for Valve Cover, please help? May 15, 2018 torque specs? Mar 20, 2017 More results from www.kia-forums.com ..

order parts remove door panel and replace parts

https://eautorepair.net/Marketing/Default.asp pay and read,

It's not complicated ! when you turn on the overhead light with one or either switch you see 2 lights. BUT there's another bulb between them that is the one that comes on with a door opening. Remove cover and replace the burned out middle bulb.

Question edited for clarity and typo. some help in the link. https://www.google.com/search?q=2016+Kia+Sorento.+4WD+actuator+replacement ..

Yes I have one.message me: [email protected]

It can only be a few things Gail. Fuse is the first thing to check. Then check the switch for power and continuity. You have changed the resistor, so we assume the new resistor is good. The only thing left is the blower motor itself. Remove it and add 12 volts to it.

Set the blower control on high with max a/c then try to tap on the blower motor and if it run or starts and stops replace the motor.