20 Most Recent 2010 Mercedes-Benz Sprinter Cargo Questions & Answers


i am sick off my sprinter shuting down on motarways. What can i do to remove engine management

2010... | Answered on Aug 28, 2015


Unplug battery x few second . You ll have to re seteverhitonf after words.

2010... | Answered on Jul 03, 2015


The vehicle enters limp mode.

P0643 is a generic code. Sensor reference voltage high. This would indicate a possible wiring issue somewhere. This could be on the electronic throttle module somewhere as it is triggered by using the throttle. Unfortunately it doesn't sound like a simple cheap fix. Look for a mercedes independant commercial garage in your area to have a look at it.

2010... | Answered on Mar 04, 2014


check th IVR( is IC that regulate the power exactly to the instrument in dashboard)+ THIS CAUSE to this problem
See the troubleshooting chart for fix it .

7_25_2012_9_35_46_am.gif7_25_2012_9_36_05_am.gif7_25_2012_9_36_39_am.jpg

Mercedes-Benz... | Answered on May 30, 2019


At this website www.reliable-store.com I found so much of information on how to repair vehicles and technical issues in detail..
Also complete, much better language, and they also have live assistance feature

Mercedes-Benz... | Answered on Mar 07, 2018


there is a pressure relief valve in the hydraulic pump
if you have no or very little pressure being generated , it may be that that valve is jammed in the open position or the spring controlling it has broken
in any event the basic problem is that the hydraulic pump is not producing a volume sufficient to build up pressure
check the installation of the filter as it may be restricting oil flow to the pump in installed incorrectly

Mercedes-Benz... | Answered on Dec 22, 2017


Being 13 years old, a reluctor on a wheel has probably rusted off or a wheel sensor has failed.

Mercedes-Benz... | Answered on Nov 19, 2017


I have a 1994 c ckass w202 mine did this it blew hot air all the time realy anoying in the summer lol any way it was the controler that wss at fault the bit on your dash that regulates the temperature if not yhere is a mixture valve under the bonnet itvregulates how much water goes into the heater matrix

Mercedes-Benz... | Answered on Nov 07, 2017


As the vehicle has just had a full service your van shouldn't be suffering those problems and you should return to the repairer and complain bitterly, do a war dance or whatever it takes for them to finish the job and deliver what you paid for.

If your Sprinter is fuel injected and catalysed there will be nothing to adjust but you need to know the CO2 content rises as the engine runs more efficiently while it is the CO level that should fall.

There are many reasons for poor fuel economy other than high exhaust emissions but after a proper full service the vehicle should already be running as efficiently as possible.

Mercedes-Benz... | Answered on Oct 20, 2017


have 2013 Mercedes rv message 0208 and yellow lights not blinking of ABS, tire, and car

Mercedes-Benz... | Answered on Sep 22, 2017

Not finding what you are looking for?
2010 Mercedes-Benz Sprinter Cargo Logo

6 questions posted

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Marvin
Marvin

Level 3 Expert

85216 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Sprinter Mercedes-Benz

  • Sprinter Mercedes-Benz

Most Popular Question

p202e code sprinter van

  • Cars & Trucks
Loading...