20 Most Recent
2006 Nissan Altima 2.5 Questions & Answers
When a 06 Altima 2.5 jump's time did it hurt the values
It's an interference engine so you have a slight chance the valves didn't bend. So when you put the new belt on start the engine before you put it all back together if it rune good continue to assemble, if not continue to disassemble. I hope this helps take care.
How to set timing
Timing is set by lining up the mark on the cam gear and on the crank..... Are you replacing the cam belt?
Replaced passenger light and checked the fuse, light still will not come on
the light socket itself maybe broken, wiring to the you open or cut.
if you have a volt meter set the voltmeter for 12 volts put the positive lead on the middle of socket and the ground to the frame or outside socket. see what the voltage, if you do not get any voltage than the socket maybe bad or theres a wiring issue
you already tried replacing the bulb, you check the fuses.
you done all you can do
if you want to have it fixed for the wife than take it to your dealer for repairs,
Car starts but it takes 10 seconds to start why??
could be discharged battery after battery sets awhile like overnight there is a voltage drop and it will cause slow starts also clean and inspect battery top, terminals, connections and cables for corrosion and or breaks all of which will make for slow starts and eventually a no start conditon
Where is the wiper fuse
you need to claim a total loss on your insurance,you will never get rid of all the mold unless you take EVERYTHING OUT OF THE CAR
2006 nissan altima 2.5 balance shaft assembly timing
Before I replaced the balance shaft assembly chain on my 2004, the marks on the chain weren't lined up with the marks on the sprocket. When I installed the new chain, I just lined up the marks. (Had to rotate balance shaft independent of crankshaft to do this) Wasn't any noticeable vibration before or after, not really sure why the marks weren't lined up before.
Hope this helps.
Not finding what you are looking for?