20 Most Recent 2008 Toyota 4Runner SR5 Questions & Answers

Your odometer needs to be set on the mileage or trip 1. Turn key off. Hold trip reset button down. Keep button down and turn key to the on position. Hold button until light go's out. If it does not work after 60 seconds switch to other setting. Mileage or trip 1

2008 Toyota... | Answered on Apr 19, 2016

Have you checked the driver master switch with a meter, and do you have a lockout switch for the other windows ?

2008 Toyota... | Answered on Jul 28, 2014

If it is a factory install alarm, It can,t be changed, You have to live with it.

2008 Toyota... | Answered on Oct 25, 2012

The engine and transmission in this cars drive train are fully electronically controlled by a computer called the PCM (Power Train Control Module). Whenever a problem like this occurs the computer stores a record of the problem (there are of course some exceptions to this, like the fuel pump, engine coolant temperature sensor and MAF sensor for instance) in the form of a fault code in its memory, to read these fault codes you must have the systems memory scanned with a special tool. Once the fault code(s) are read you then must perform the appropriate diagnostic testing to find and resolve the problem(s) DO NOT REPLACE ANY PARTS UNTIL A TRAINED TECHNICAIN HAS DIAGNOSED THE PROBLEM TO AVOID SPEDING YOUR HARD EARNED MONEY ON PARTS THAT MAY NOT CORRECT THE PROBLEM

2008 Toyota... | Answered on Jul 16, 2012

https://www.youtube.com/watch?v=dp0haTIErvU this video will point you in the right direction here is a link to a picture https://www.2carpros.com/images/external/79028252.gif

Toyota 4Runner... | Answered on Jun 03, 2019

Have you checked the Heater Plugs. or the electrical supply to them? Difficult cold starting can often be caused by Heater Plug failure in most diesel engines

Toyota 4Runner... | Answered on Apr 26, 2019

Hello, the check engine light will also cause the other lights to turn on, those will usually go off when the cause for the check engine light is fixed or the check engine light is cleared by disconnecting the battery. The P705 is a transmission fault code, it refers to a problem with the transmission range sensor, this is part of the neutral start switch located on the side of the transmission where the shift selector attaches, it has a large connector with wires on it, these connectors can corrode so remove it can check and clean as needed or if nothing like that can be found replace the neutral start switch.

Toyota 4Runner... | Answered on Apr 19, 2019

does it have spark from the distributor

Toyota 4Runner... | Answered on Oct 14, 2018

Not finding what you are looking for?
2008 Toyota 4Runner SR5 Logo

10 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Toyota Experts


Level 3 Expert

85222 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

4Runner Toyota

  • 4Runner Toyota

Most Popular Question

worked something around driver side door

  • Cars & Trucks