20 Most Recent 2005 Toyota Prius Questions & Answers

buy online fob and and look up online also the procedure to program it if you have auto /remote start dealer needs to flash it then as to key dealer or an authorized locksmith and most key cutting places can cut vehicle keys now

I assume the AC was turned on, and I assume you mean the cabin ventilation fan. If these remain unavailable often, it probably has something to do with either fuses or the control panel and nothing to do with the engine or motor. Is there a check engine light - if so get the code read. If not then assume the dash board control panel might have a wiring issue.

Check the inverter hoses routing.

toyota prius codes p3022 check engine light on

Interesting. Personally, I would remove the hot side of the battery and leave it off for about 30 minutes and then reconnect it. It sounds like something has corrupted. This will reboot your system. If that doesn't work...call/write/chat with Toyota and explain what is happening and see if they have a suggestion. Semper Fi, Z

KEYLESS REMOTE PROGRAMMING 1- Driver's door open & unlocked. Key out of ignition 2- Insert & remove key 2 times within 5 seconds 3- Close & open drivers door twice within 40 seconds 4- Insert key into ignition & remove 5- Close & open drivers door twice within 40 seconds 6- Insert key into ignition 7- Close the door 8- Turn ignition switch from "LOCK" to "ON" & back to "LOCK" - ONCE for ADD mode - TWICE for REWRITE mode 9- Remove the key from ignition 10- To confirm your mode selection, the power locks will now cycle "lock" to "unlock" a number of times corresponding to your key cycles in step 8 11- Within 40 seconds of confirmation - Press both transmitter Lock & Ulock buttons simultaneously - Within 3 seconds press transmitter Lock button for more than 1 second - If successful, the power locks will cycle once (twice indicates transmitter problems) - Repeat step 11 for additional remotes 12- Open door to exit programming.

that is normal for spedo to stop at 299999. I dont know why toyota did this but i read on there site that they made the spedo not go over that amount. maybe they did the same thing to check engine light. I dont know on that though.

you have two coolant systems on a hybrid. both systems should of had the coolant changed (due @100k). Spark plugs should of been changed (due @120k). those re the two high mileage maintence items I would be sure were done. Toyota dealer can change the beep to a single beep instead of a constant beeping.

Dealer item if it's still available.

Car won't start. Check the following systems: 1. No. 1 Motor generator - 2. Hybrid control system 3. Immobiliser system 4. Smart key system 5. ECM power source

It needs computer scanning.

Red exclamation sign is called Master warning light. Get the car be scanned thoroughly to know the exact location of the problem.