20 Most Recent 2007 Volkswagen Polo 1.6 Questions & Answers

It is possible to do this, although it is not easy. It requires reprogramming the HMI in the unit. I am in the process of doing this on my AVN6606HD and it would probably apply to other units to convert from japanese to english.

A sticking release solenoid is my guess.

on main engin pully use white chalk on edge of pullies to find notch

WHAT DO U NEED EXACTLY?SEND ME AN EMAIL AT [email protected]

link: Torque Specs Database

They just pull out. they are a bit tight so wiggle them. Don't use tools as they will tear.

Apple suggests the 5 R's Reset, Reset, retry, restart, re -install, and restore. Try these : http://www.spobd2.com/wholesale/ford-vcm-ii-diagnostic-tool-la-segunda-eneracion.html in order to return your car to function.

u need a computer diagnostic and not at a parts store-there selling items by bad codes -too general

remove the headlight is easier ,in the back of the access panel if you can get to it is a spring clip well you sort of push this down and sideways on one end ,use a mirror and you will see what i mean ,not the screws though they hold the bracket the clips is on

I'm not familiar with that model, but the problem could be the temp sensor or relay. The pcm should read the sensor and turn on the relay when the temp exceeds normal. You can proble the relay socket to see if the pcm is trying to turn the relay on. See tips at link below. Do It Yourself Diagnosis and Repair