20 Most Recent 2012 Ford Edge SE 4dr SUV 3.5L V6 6-speed Automatic Questions & Answers

If you have lots of time and patience you can try to fix it. The best is to replace the whole washer assembly which is usually sold as a unit, the pump with the reservoir.

check the adjustment on the door switch it is the same one for the interior lights . or the switch is bad.

How much fuel is in your tank when it happens?

replace the battery? Or I suggest you go to the car makers web site see if they have a forum. See if anyone else has the same problem? I found that to be very helpful.

a good vaccuum and a skinny hose...the question is how are they getting in there if the cap is on Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/sean_54c3a3dc48a7773c

2022, 6,000 miles and brand new. Sort of bull, but not. The code tells the problem, but once the engine malfunction light go out, it is lost to the driver. However, all codes should be listed historically hiding in the background of the ECM that can be read with a pro grade scan tool computer, the sort that cost $3,500 to $5,000. These scan tools can also record what happens in real time. The dealership needs to keep it, drive it and record when it happens. If it only happens for a couple of seconds, you are not going to be able to catch it but they should be able to access those stored codes. If you are anywhere near Tennessee, reach out to Scotty Kilmer on YouTube. He loves calling out the likes of Ford for shoddy workmanship. He also has a number of those pro grade scan tools.

Check this out.https://www.autoserviceprofessional.com/article/95758/gtdi-wastegate-issue

This link will show you what it look like and where it is located good luck. https://www.rockauto.com/en/moreinfo.php?pk=8055360&cc=3310415&jsn=9

check for faulty spark plugs. if not then throttle body cleanup and fuel injection cleanup. if not check Clutch

You just go to the link below, I'm sure you will get the solution of your problem https://www.reliable-store.com

14-16 lbs. torque Torque the inner bolts first and work out to the front and rear bolts last.