20 Most Recent 2002 Mitsubishi Montero Sport XLS Questions & Answers

Question edited for clarity Not easy to get to or change according to this. https://www.justanswer.com/mitsubishi/5693h-crankshaft-position-sensor-located-2003-montero-is-diagram.html More https://www.google.com/search?q=2002+montero+sport+xls+2wd+3.5+v6+crankshaft+sensor+location ..

I know this website www.reliable-store.com that i get manuals from, and they have all models online that solve all simple/technical problems like professionals I also brought for my 1989 BMW, such old model, they had it and it was very good manual. Go ahead, I bet.

If transmission fluid level is up to par then you just might need tranny repair. And that is not cheap.

Bad relay

stick or auto you have to be specific here ,if it is a stick then your syncros sound like they are going bad ,if it is an automatic, then change it

Find the lower hose. Follow it to the engine. Remove the metal housing from the engine that the lower hose is attached to. The thermostat will be behind it. I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

In the owners manual in the glove box

CLOGGED UP,BLOW THEM OUT.

answered in your previous question, not enough amps from your battery, try jumping it, or replaceing battery, test it at autozone

not enough power to engage the starter. it might how power to turn on everything but not enough amps to start, have it tested at autozone

you might want to try to prime the fuel filter. Open the bleeder - 10mm- and press the pump. See if you have air in the line.

Connect a scan tool and the DTC code will tell you the issue.. https://www.google.com/search?q=4m40+engine+neutral+light+blinks+continuously ..

Check the clutch disengaging properly ...............

Some things to check:

• CV axles (a telltale sign of bad or wearing axles is noise)
• Suspension bushings (sway bar bushings, etc)
• Motor mounts (including transmission mounts)
• Control arms/ball joints (some aftermarkets fail out of the box)
• Strut mounts (worn or faulty strut mounts can cause noise)
• Proper torque spec for all suspension components

under left side of dash

follow this link and click on torque tables and look up your vehicle http://www.speedwayautoparts.com/index35.htm

Question edited for clarity. No one has documented how to do it, so basically you remove the door panel and look. There are spares and parts schematics in the link. https://www.google.com/search?q=mitsubishi+fuso+fm557+replace+window+regulator ..

You have a module issue, but which one, Throttle Position sensor, Throttle body, MAF, Crankshaft, or Camshaft, or a bad connection. An auto electrician with a pro grade scan tool can diagnose. https://www.google.com/search?q=mobile+auto+electrician+near+me ..

can be something other than switch -----------http://mmc-manuals.ru/manuals/pajero_sport_iii/online/Service_Manual/2017/35/html/M135202550030702ENG.HTM

Question edited for clarity, turned around, add magic word. In the link https://www.google.com/search?q=Mitsubishi+M3+Torque+specs+for+L3G14+head ..