20 Most Recent
2008 Chrysler Pt Cruiser - Page 9 Questions & Answers
I don't have an owners
Hi.
The issues are not dealt with in the owners manual. Here the owners manual:
Chrysler PT Cruiser.pdfThe problems described look like symptom of a fault. The windshield fluid warning is triggered by a sensor. The fuel tank level is detected by the sender inside the fuel tank. The two problems at once may be symptom of a wiring problem or may be isolate faults. The first step in troubleshooting would be testing the fuel tank sender.
Regards.
Ginko
Car won't start makes clicking noise when you
The click noise is the sound of the starter SOLENOID clicking but not contacting to supply voltage to the starter motor.
Now a multimeter test will confirm if the solenoid is contacting and if so then the starter motor is faulty.
It can be due failure of the BRUSH in the motor or the commutator. If so remove the motor and confirm.
Also if the starter pinion is struck the solenoid will click and the motor may not turn.
2008 PT Cruiser - while driving guages tank to
have seen this before, you need to return to the dealer and have them look up a TSB OEM REF NO. 08-016-06 and 08-016-06 REF.A intermittent operation of electrical components due to ignition off draw ( IOD ) fuse not being fully seated.....on some models we have had to replace the fuse blok to cure the problem........good luck
let me know if there is any thing else you need.
My 2006 PT Cruiser is
sounds like the computer has picked up a problem within the system, have someone, or yourself hook up a obd 2 code tester retrieving tool , to the aldl, under the instrument panel, on the left side of the steering columb, in order to find out what the code problem is, then you can check that area out for the problem, " also, auto zone will hook this tester up for free.
Seatbelt alert goes off even
There is apparently a problem with the switch in the seat belt mechanism that is not doing it's job. You will brobably have to replace the entire seat belt to repair.
Carbon build up in a
they make a product called lucas fuel injection cleaner that is poured into the gas tank to clean the valves, and help to remove carbon from the cylinders, it works very well, you can purchase this at auto part stores.
Not finding what you are looking for?