20 Most Recent 2004 Chrysler Town & Country Questions & Answers


there is a plastic cap where the arm connects to a post. pop this cap off with your finger nail or small screw driver. this cap hides a nut. remove the nut (10mm socket needed?) and pull the arm off to replace the blade

2004 Chrysler... | Answered on Aug 13, 2018


Did you try holding the gas pedal to the floor when starting ? It's getting too much fuel or not enough . Hooking up a scanner that can view sensor data parameters should be done to see which sensor is out of range . Coolant temp sensor possibly .

2004 Chrysler... | Answered on Feb 19, 2018


indicates a problem in the solenoid of the EGR valve ( short in the solenoid)
take it to any service center for a check and replacement

2004 Chrysler... | Answered on Dec 30, 2017


Maybe, check the transmission fluid to see if the level is correct,it's usually pink, smell it, if it smells burned,or it's almost black, it needs changing, not sure that's the remedy, but it's a start.

2004 Chrysler... | Answered on Sep 26, 2017


code p 0440 refers to the EVAP system --purge valve malfunction
check wiring and replace the purge valve

2004 Chrysler... | Answered on May 25, 2017


Try adding an extra earth lead from your battery to the engine block

2004 Chrysler... | Answered on Mar 26, 2017


Do a Google search with these words to find a belt guide.

"Dayco Serpentine belt diagrams"

2004 Chrysler... | Answered on Feb 15, 2017


If the coil pack has a four wire connector, one wire is primary voltage, the other three wires are ground, one ground for each coil, one coil fires two spark plugs. If problem with coil or ground, you would lose spark for two spark plugs. Did you visually check for spark, everywhere? What about the spark plug wire or the spark plug, itself?

2004 Chrysler... | Answered on Oct 18, 2016


I would check all fuses regarding these , they make look intact but check the legs of fuses sometimes they get like a brownish coating on them that will cause them to play up, either wipe legs down with bit of sandpaper or replace with new. Hope you sort it.

2004 Chrysler... | Answered on Aug 10, 2016


Oil Pressure Light Acting Oldly - CarGurus

www.cargurus.com > Questions > Chrysler > PT Cruiser

CarGurusApr 2, 2012 - As I continue to drive, the RPM needed to keep the oil light off (and therefore ... and when the light does turn on, I'm either at the other end of town from ... let it idle for 15min with the dummy light flashing? does the engine start ...

Oil light intermittent on off on at idle or when driving at - Fixya

www.fixya.com/cars/t25990585-oil_light_intermittent_off_idle_or_when
2 hours ago - Oil light intermittent on off on at idle or when driving at 2000Rpm, cause? Is the sending unit a possability? Seems - Chrysler 2004 Town ...

2004 Chrysler... | Answered on Jan 07, 2016


Sad to say but you will be needing to get a new transmission ..

2004 Chrysler... | Answered on Sep 18, 2015


I have a 2009 gmc canyon how do I get to the wires

2004 Chrysler... | Answered on Sep 09, 2015


have you tried to move the nozzle in different positions to see if it helps. sometimes that`s all it is. also what makes you think its an EVAP problem with no testing done.

2004 Chrysler... | Answered on Sep 01, 2015

Not finding what you are looking for?
Cars & Trucks Logo

389 questions posted

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Town & Country Chrysler

  • Town & Country Chrysler

Most Popular Question

head lights work but fog lihts come 2004

  • Cars & Trucks
Loading...