20 Most Recent 2008 Nissan Rogue - Page 5 Questions & Answers

shouldn't be on,unless the shop messed up the tp moniter.

To change the spark plugs in a Nissan Rogue find 4 wires (since this is 4 cylinder) pull them out and remember or write somewhere where they go(this is important). Unscrew the spark plugs with long wrench. Install the new one and plug the wire. ---------------------------------------------------------------------------------- vas 5054a v19

there is an electronic switch in there that when the brake pedal is depressed,that switch lets you go from park to any other gears.

Hi,There is an IPDM 'board' the relay plugs into. The relay is only a temporary fix. Contact the dealer (do you have a dodge or Nissan???) about the board and look on line for how to swap it out.GL,TD

First check the fuses, then the switch, There might be a relay too. See if power is getting to the motor if it is and it doesn't run then the motor is bad (usually the brushes are wore out).

Did you ever get this problem fixed? It just happened to my Nissan Rogue 2008. Would like to know how to fix it. Thanks!

the P0725 means Engine Speed Input Circuit______________Ktag ecu programming tool

Check brake switch under dash near brake pedal arm. When you press your brakes this switch activates power to brake lights.

If the blower motor runs in the off position, check the fan relay.