20 Most Recent 2007 Dodge Magnum SRT8 Wagon - Page 5 Questions & Answers

Check any rubber on your struts or any other rubber that's used for softening/dampering on the steering. I once had a piece of rubber on the front of a car that would squeak when my wife hit bumps going down our driveway, drive my wife crazy and since it was under warranty we made the stealership find and repair it. Only took about 5 trips to stealership before the clowns finally found it.

Over revving the engine.

Frame close to the pump as posible.

Look at the ignition switch itself or the wire harness that connects to it.

I suggest you get one of those manuals people get nowadays to do it yourself.. My brother use it to repair my car and it's totally repaired now. he got it from. www.reliable-store.com

If it was the key or the theft deterrent system it would have a light on dash with a key symbol I would check the relays in the power dist box for crank and ign make sure there good and if you have another key try it also and it's possible the receiver for tds is bad is is in the column and is around the ign switch

I really question what kind of mechanic "fixes" 17 codes without getting the car running. You need to find a more competent mechanic. You have not provided nearly enough detail for anyone to advise replacing a crank sensor and/or cam sensor as a possible fix.

Engine control module. Run a diagnostic test to see if the cam and crank sensors are working.

More then likely the air temperature control blend door is not moving.

Ignition fuse, make sure wires to starter are tight, make sure the ignition wire (skinny), is getting 12v+, when you click the key, it should only be energize when you do it with the key

see if this link helps you out. car not starting when key is turned to the on position Google Search