2008 Chevrolet Express - Page 2 - Answered Questions & Fixed issues

Yes they do.........The nitrogen filled tires a great for hotter and colder climate.........Hope this helps...........Also less condinsation in tires.

2008 Chevrolet... | Answered on Aug 16, 2010 | 99 views

check the alternator ouptut ,it shouldnt go above 15v ,

2008 Chevrolet... | Answered on Aug 01, 2010 | 557 views

most vehicles have a seperate fuse from lighter. on the 2006 it is right next to lighter fuse. hope this helps,

2008 Chevrolet... | Answered on Jul 26, 2010 | 136 views

you will need to remove the panel covering the door post. usually two parts the upper from midway to the roof and the lower will cover bolts that attach the seat belt to the vehicle. Probably going to be an electrical connection also but just on the bottom. Replacing belt make sure it is in the right position or it will not work. test before replacing panels.

2008 Chevrolet... | Answered on Apr 25, 2010 | 121 views

Not sure about your vehicle , but most chevys have a reset button in the fuse panel. It hase multiple functions , so you will have to check the owners manual or ask a chevy dealer the exact procedure. If memory serves me correctly , you push and hold the reset till the light flashes , then release and press it again. good luck

2008 Chevrolet... | Answered on Mar 12, 2010 | 440 views

Check to see if the sensors are reconnected. If they are, lower rear tire pressure to 55 to 60 and recheck status light. You will have to turn the engine off and back on to reset.

That is a stretch but it has worked for me on other Chev models.

P.S. Confirm 55 x units mbar KPa Psi with tire pressure gauge.

2008 Chevrolet... | Answered on Jan 16, 2010 | 620 views

take the hose off that goes to that nozzle and have someone operate the washer and see if water comes thru the hose if it dosen't go to were the hose tees into the other side and try it there, if it comes out of the hoses when you operate it then you need to take a needle and unstop the nozzle that the water should come out of.

2008 Chevrolet... | Answered on Dec 31, 2009 | 85 views

Look in the owners manual first. I have seen some of the fuse boxes under the back seat on the drivers side. Also try http://www.etrailer.com/faq-wiring.aspx. This should help. Mike

2008 Chevrolet... | Answered on Oct 02, 2009 | 479 views

look under the hood for a box labeled fuses and relays as well as sometimes in the glove box on the drivers side dash as you open the door and under the dash ...what type of vehicle ?

2008 Chevrolet... | Answered on Sep 06, 2009 | 113 views

Did you check the dome override button? It shoiuld not be pressed in, otherwise the lights won't come on with the door or the dimmer slide switch moved all the way to the top.

2008 Chevrolet... | Answered on Jul 21, 2009 | 690 views

that's because its to plug in for an electronic trailer brake controller

2008 Chevrolet... | Answered on Mar 09, 2009 | 1,106 views

Ask dealer if it has a towing package on it. If it does, you usually just pop fuse in under hood for electric brakes, and harness to adapt into is usually near or at rear bumper. Even if it doesn't have brake wire, you should still be able to install adapter at rear,for lights etc. which is available from dealer or auto supply places, then you may have to run electric brakes separate.

2008 Chevrolet... | Answered on Feb 21, 2009 | 945 views

Yes you will have to hook up a adapter. The only reason that you would not have to do this is if your vehicle came with the complete tow package, meaning shocks and tighter springs and everything else. But most of these models require a adapter to run electric brakes

2008 Chevrolet... | Answered on Feb 21, 2009 | 261 views

They are Correct. This Feature is Built Into the Computer System in the Newer Vehicles and Cannot be Bypassed. Please Rate my Response, I need all the Help That I can Get! Thanks!

2008 Chevrolet... | Answered on Jan 28, 2009 | 43 views

Check your brake fluid level. If it is ok, unplug your emergency brake switch. Tell me which knocks it out so we can dea,l with that problem. If this has been helpful, please post as such. Any more help needed, don't hesitate. TY

2008 Chevrolet... | Answered on Jan 26, 2009 | 101 views

Sounds like you just need to reset the tire pressure system. It won't hurt to drive. Check your owner's manual on how to reset, or ask your dealer.

2008 Chevrolet... | Answered on Nov 19, 2008 | 250 views

Comes with regular air in the tires. And if your Pressure monitor system is malfunctioning it may need reset by the dealer. We have a van that needed a new computer to resolve the pressure monitoring system problems

2008 Chevrolet... | Answered on Aug 30, 2008 | 593 views

no it wiil be normal righty tighty lefty loosey.

Chevrolet... | Answered on Dec 15, 2019 | 33 views

Trace wire and voltage back to switch point and restore with new switch point or new power source.

Chevrolet... | Answered on Nov 09, 2019 | 22 views

Behind the trim panel on the right or left side in the rear of the vehicle is the rear HVAC - heater , ventilation an A/C unit . The blower motor could be bad or the controller or the blower motor resistor . Doesn't work at any speed ? Your best bet mite be to have a qualified repair shop check it out .

Chevrolet... | Answered on Jul 11, 2019 | 16 views

Not finding what you are looking for?
Cars & Trucks Logo

100 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts


Level 3 Expert

85222 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides