2008 Chevrolet Express - Page 7 - Answered Questions & Fixed issues


Answered.

Chevrolet... | Answered on Jun 15, 2012 | 348 views


It just bolts to the body, easy

Chevrolet... | Answered on Jun 15, 2012 | 241 views


There is not simple fix I am aware of, this almost always means the transmission has failed.

Chevrolet... | Answered on Jun 12, 2012 | 190 views


it should be on the fuel rail itself. with a vacuum hose coming out the top of it. befor you replace it make sure the wiring harness for the injectors is plugged into the main harness

Chevrolet... | Answered on Jun 11, 2012 | 176 views


po785 is a shift/timing solenoid malfunction. po340 is a camshift position sensor A-Bank 1 circuit malfunction.

Chevrolet... | Answered on Jun 05, 2012 | 809 views


One thing to check into would be the antitheft system. Not knowing what year or type of vehicle makes it hard to help. But like i said, engine shut down in 5 seconds or less is a symptom of a bad antitheft security system. This link explains.
http://vatspasslockpasskeysecurityhelp.yolasite.com/

Chevrolet... | Answered on Feb 25, 2012 | 270 views


Are they stuck on lock? Maybe you have a switch stuck or shorted out?
Please rate my answer so I get points for it.

Chevrolet... | Answered on Jan 23, 2012 | 227 views


Call a locksmith, if you try to break in you will most likely do more damage than good and end up costing more than getting a pro to open it for you. This advice comes from 45 years of work experiences.

Chevrolet... | Answered on Jan 17, 2012 | 65 views


Step 1: Confirm the heater core is leaking.
Step 2: Take it to a mechanic.
Step 3: Pay the man for his good work.
Step 4: Rejoice in that you did not have to depend on this website for help.

Chevrolet... | Answered on Oct 07, 2011 | 390 views


If the steering wheel is shaking when you apply the brakes, this is usually caused by the front rotors being warped, you can either replace the rotors (replace front brake pads as well) or if they measure thick enough, they may be able to be machined to recover a smooth - non warped surface again. Your local Auto Zone, Advance Auto Parts, or any other parts place usually can machine the rotors for you at a resonable price, but sometimes it is better to just replace them.... the thinner the get machined the less heat they will disapate and could possibly warp again after a few thousand miles.

Hope this helps

Chevrolet... | Answered on Sep 17, 2011 | 206 views


Check if the car starts when you jump start it. If it does try to remove the jumper cable and the negative of the battery. If the car dies then it is a weak alternator. If it keeps on running it is likely a weak battery. If jump starting does not work you can be sure that it could be electrical or the fuel delivery is an issue.

Check also if all cylinders has sparks by pulling out the high tension cables from the spark plugs one at a time. Make sure you have gloves and you keep the end of the cable over the motor. There may be one that is weaker than the other. It could be a bad cable or wire.

Have the fuel pressure at the injector tested. The pressure may be low due to dirt or faulty injectors.

Chevrolet... | Answered on Sep 11, 2011 | 18 views


i own a 2006 chevy express cutaway box truck the interior box lights are not working and i do not know what fuse designates them can any one help me locate the proper fuse

Chevrolet... | Answered on Apr 30, 2016 | 3,223 views


Hello

The 6 flashes are not an Airbag fault code ...the flashes are only to alert the driver that a fault exists, in other words to get your attention to a failure of the SRS (supplemental restraint system) system - You will now need the system scanned with a special scanner that can read the codes in the Airbag/SRS system. This is not a generic scanner, it is a special tool, most repair shops will have one or of course the dealer. And any AIRBAG system fault shuts down the system, so if you get in an accident you will have no Airbag deployment.

Chevrolet... | Answered on Sep 03, 2011 | 198 views


MASTER CYLINDER , WHEEL CYLINDER OR A LINE LEAKING

Chevrolet... | Answered on Aug 30, 2011 | 59 views


Get your fuel pressure tested. You may have a bad check valve, (part of the pump) or a failing pump.

Chevrolet... | Answered on Jul 30, 2011 | 60 views


What is Simulating Overheating? it either is overheating, or its not. What engine do you have? What is the trouble code? DO NOT take the word of a parts store free code scan . The ECT is near the thermostat housing.

Chevrolet... | Answered on Jul 27, 2011 | 232 views


spark plug gaps is a standard 25th ,head settings for a alloy head 65lbs and cast iron 75lbs ,i dont think you can go wrong with the settings i have given you regardless of make /model/age of vehicle

Chevrolet... | Answered on Aug 01, 2011 | 166 views


You've already eliminated #3 and #6, so keep checking...

Priority Action Part Type Cause
1 Inspect Radiator Cooling System Clogged.
2 Inspect Radiator Radiator Fins Obstructed.
3 Inspect Radiator Cap Worn or Damaged Radiator Cap.
4 Inspect Radiator Fan Motor Faulty Fan Motor.
5 Inspect Belt Incorrectly Routed, Adjusted (Tensioned), Missing or Worn Drive Belt(s).
6 Inspect Thermostat Faulty Thermostat.
7 Inspect Water Pump Worn, Cracked or Leaking Water Pump.
8 Inspect Radiator Fan Relay Intermittent Failure

Chevrolet... | Answered on Jul 16, 2011 | 366 views


36 mm wrench,counterclockwise to remove.

Chevrolet... | Answered on Jul 11, 2011 | 164 views

Not finding what you are looking for?
Cars & Trucks Logo

100 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...