20 Most Recent 2008 Dodge Magnum Questions & Answers

0helpful
1answer

I need a fuse box

10/7/2019 1:36:53 PM • 2008 Dodge... • Answered on Oct 07, 2019
0helpful
2answers

2008 magnum seat belts wont unlock

you have to replaced the affected seat belt retractors with new assemblies..safety items
4/28/2018 7:53:58 PM • 2008 Dodge... • Answered on Apr 28, 2018
0helpful
1answer

Where is the fuse in the fuse box for the radio in

Cavity 36 inside the rear power distribution center, should be inside the car, is the fuse for the Radio/Navigation. I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514
10/16/2017 8:33:40 AM • 2008 Dodge... • Answered on Oct 16, 2017
0helpful
1answer
0helpful
1answer

How to determine if I have engine sludge in my 08 dodge magnum

You would want to take the valve cover off and check to see if you have build up inside.
9_21_2016_8_00_45_am.jpeg
9/21/2016 8:00:44 AM • 2008 Dodge... • Answered on Sep 21, 2016
0helpful
1answer

Replace ignition switch with used ignition

The car's computer needs to be programmed to accept the key you're using with the replacement switch. There is a chip in each key, and if the computer doesn't recognize the chip, it will not allow the car to continue to run. As far as I know, only the dealer can reprogram the computer, and it may not be cheap.
1/23/2016 5:23:40 PM • 2008 Dodge... • Answered on Jan 23, 2016
0answers
0helpful
1answer

Power locks won t lock or unlock

Check fuse.
10/12/2015 6:14:45 PM • 2008 Dodge... • Answered on Oct 12, 2015
0helpful
1answer

My windshield wipers aren't working! HELP!!!

sounds like the switch if you have to turn on and off 10 times. A voltage meter connected to the plug that goes to the motor would confirm the switch or a possible blown fuse that is broken and touching and then breaking . Again a volt meter would confirm this. A light probe 12V could be used instead of a voltmeter to test this.
6/13/2015 4:54:27 AM • 2008 Dodge... • Answered on Jun 13, 2015
0helpful
2answers

The hood on my 2008 dodge magnum won't open I pull

Use a plastic putty knife and pry it up. pry between the hood and front near the center of the car. good luck then lube it with white grease
11/15/2014 6:48:58 AM • 2008 Dodge... • Answered on Nov 15, 2014
0helpful
1answer

I can't open the hood on my 2008 dodge magnum. I

Pop the hood then go too front of car and hit hood near front with your palm. Try two or three different locations
11/14/2014 6:36:53 PM • 2008 Dodge... • Answered on Nov 14, 2014
0answers
0helpful
1answer

How to install camshafts

Get a copy of a diagram off a repair shop data base, or buy the factory service manuals or look for a diagram on the internet
7/30/2014 8:56:11 PM • 2008 Dodge... • Answered on Jul 30, 2014
0helpful
1answer

Shift solenoid d malfunction

Replace it. And the filter and fluid....
5/22/2014 3:37:54 AM • 2008 Dodge... • Answered on May 22, 2014
Not finding what you are looking for?
Cars & Trucks Logo

Popular Tags

139 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Magnum Dodge

  • Magnum Dodge

Most Popular Question

open hood 2008 dodge magnum

  • Cars & Trucks
Loading...