20 Most Recent 2008 Dodge Ram 2500 Questions & Answers


parasitic draws are difficult to find. The normal way is to connect an ammeter between the battery and note the power draw. Disconnect one fuse at a time noting which one stops the draw, remembering that the radio has a anti-theft light, and the clock draws minimal power. When you pull a fuse that stops a major draw, you know it is the items controlled by that fuse that are the problem. Then physically disconnect the items covered by the fuse one by one. Normal garages hate this type of job as they are so time consuming. Only auto-electricians will normally tackle the problem.

2008 Dodge Ram... | Answered on Jul 28, 2017


110 ft.lbs lower and 60 ft.lbs upper

2008 Dodge Ram... | Answered on May 28, 2016


All of the locks, one lock, remote or from the main switch ( driver door) If it's one door , usually switch/ wiring or linkage in the single door. All doors from main switch, check conn at main switch,ck for voltage at switch. If you have voltage 9 x out of 10 main switch. (especially Dodge) PS use a test light

2008 Dodge Ram... | Answered on Sep 19, 2015


No magic bullet fix for the issue you are having. You will need to proceed step-by-step to diagnose the issue. Begin by changing the oil filter and the oil, as simply draining the oil from the oil pan may release whatever debris is clogging the oil pickup.
If your engine ran dry on oil, or if oil stopped circulating, and you tried to run the engine anyway, you may have done permanent damage to the engine, necessitating a complete overhaul. You can judge this by the condition of the oil when you change it.

2008 Dodge Ram... | Answered on May 18, 2015


Big A-- there are specs for the ball joint stud nuts!!
You're the exact reason I don't take mine to dealerships!!!
Do my own work.
Torque specs are put out for a reason u DA!

2008 Dodge Ram... | Answered on Mar 29, 2015


Go to this link and click on your make, model etc. If stereo not there for your year, go to year after or previous year and quite often are the same. http://www.the12volt.com/installbay/vehicles.html

2008 Dodge Ram... | Answered on Oct 28, 2014


What solenoid has to do with the battery. Just check the gravity of the solution. By the way how old is your battery, old batteries have to be retired due to worn out cells etc

2008 Dodge Ram... | Answered on Aug 11, 2014


these ball joints require a ball joint press loosen axle nut then remove wheels, front brake caliper and mount. now there are 3 bolts that hold the wheel bearing hub assembly on remove if has ABS then remove wiring harness with hub (you have to hammer free) once off then side axle shaft out hole. remove both nuts that hold ball joints to steering knuckle and differential install press and remove and install then reassemble NOTE rent a ball joint press or buy a cheap one from harbor freight.

2008 Dodge Ram... | Answered on Jun 04, 2014


Sorry to say but it might be the PCM which is under the hood and soaking it is a bad idea. If it is dead you might be able to have it flashed , if not you will have to replace it and do not soak it again, they do not like water, as does any computer.

2008 Dodge Ram... | Answered on Nov 24, 2013

Not finding what you are looking for?
Cars & Trucks Logo

Popular Tags

150 questions posted

Ask a Question

Usually answered in minutes!

Top Dodge Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Ram 2500 Dodge

  • Ram 2500 Dodge

Most Popular Question

2010 dodge cummins 4x4 2500 replace

  • Cars & Trucks
Loading...