20 Most Recent 2008 Dodge Ram 2500 - Page 2 Questions & Answers

Sorry to say but it might be the PCM which is under the hood and soaking it is a bad idea. If it is dead you might be able to have it flashed , if not you will have to replace it and do not soak it again, they do not like water, as does any computer.

check your fuses make sure they are tight

water in fuel or it needs servicing

If your talking about the "change oil" maintainence light here is the procedure. Turn your key to the on position (do not start). Within 10 seconds fully depress the gas pedal to the floor slowly 3 times. Turn the key to the off position. This should reset that light however if you haven't had your regular oil change done I suggest you do it. I hope this helped and good luck.

you need to change the computer and the wiring harness make sure the batt. is disconnected while replacing the computer or you could end up having to re flash the computer. GOOD LUCK hope this helped out.