20 Most Recent 2008 Suzuki SX4 - Page 7 Questions & Answers

0helpful
1answer

My 2008 Suzuki SX4 tire pressure indicator light has been on for weeks. I have checked the tire pressure on all tires and everything seems ok. Can anyone tell me why this light is still on?

You will need the dealer to scan the system for the problem that giving you a false indication of low pressure. Also make sure the spare has the correct pressure.
12/28/2012 1:08:57 AM • 2008 Suzuki SX4 • Answered on Dec 28, 2012
0helpful
1answer
0helpful
1answer

Noisy power stearing pump? Or rac

Pump is the WhineThat doesn't mean it is badMore likely the rack is restrictedI would first try flushing the systemRemove the return line at the pump,pull outinjector fuses & crank motor,oil goes into bottleunder car.Use correct p/s fluid & add some Lubgard Brandp/s Additive.Need good lower ball joints & upper strut bearings alsoor you load the steering system,any tight suspension joints
12/27/2012 3:17:22 AM • 2008 Suzuki SX4 • Answered on Dec 27, 2012
0helpful
1answer

My car wont start and im geting the system check message?

is it turning over ? if sooo could be a fuel pump, but if no turn over or any thing could be starter or silanoid , maybe even battery cables need cleaned if caroaded
12/14/2012 2:27:06 PM • 2008 Suzuki SX4 • Answered on Dec 14, 2012
0answers
0helpful
1answer

Where is the knock sensor located on my 08 suzuki sx4

The P0327 means Knock Sensor 1 Circuit Low Input (Bank 1 or Single Sensor).the knock sensor is located in the front of the engine located behind the oil dip stick just to the left._______________Ktag K-TAG
10/23/2012 2:00:24 AM • 2008 Suzuki SX4 • Answered on Oct 23, 2012
0helpful
1answer

Idling off after changing battery

Clean throttle body
9/12/2012 11:11:53 PM • 2008 Suzuki SX4 • Answered on Sep 12, 2012
0helpful
1answer

Can't retract rear disc brake pistons with G clamp Suzuki SX4

Hi Andrew, Have you released the parking brake? If you have done so, you may have a problem which will mean removing the calipers and maybe replacing the piston seals. make sure the pistons have not come out too far and are aligned. The pistons should slide into the cylinders easily with the correct use of a 'G' clamp. I believe that the pistons may have become misaligned, so please check that. Regards John
9/10/2012 7:04:21 PM • 2008 Suzuki SX4 • Answered on Sep 10, 2012
0helpful
1answer

How do you put a 2012 suzuki sx 4 tpms in to learn mode

You need factory scan tool.
9/6/2012 3:22:27 PM • 2008 Suzuki SX4 • Answered on Sep 06, 2012
Not finding what you are looking for?
Cars & Trucks Logo

354 questions posted

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

SX4 Suzuki

  • SX4 Suzuki

Most Popular Question

suzuki sx4 2008 model malfunction

  • Cars & Trucks
Loading...