20 Most Recent 2008 Honda Ridgeline - Page 9 Questions & Answers

Some comments in there... https://www.youtube.com/watch?v=Q4LtKzPk0W4 Hope help.

find SETTING to change in your honda

Yes it does, but a few things first.It has to be TDC on compression stroke on Cylinder 1 (both valves closed).Check the battery is fully charged.https://www.google.com/search?q=1997+honda+luxline+crank+sensor+location..

Depending on the targeted market of the vehicle and the model, some only come in Japanese because they are for domestic use. The easy way is to use a smartphone with the Google Translate App and use the Camera Feature to translate what you see on the screen. Look for Settings / Language. https://www.google.com/search?q=Honda+Fit+which+has+screen+gathers+VXH-082MCV+in+Japanese.+How+can+I+change+to+English ..

Is the vehicle overheating? You can use a infra red thermometer to check the temperature both sides of the thermostat housing. That is the only way to check without removing it. The temperature through all parts of the cooling system should be within a few degrees. The proper way is to remove the thermostat and put it in a saucepan of cold water and bring it up to a simmer. You put a thermometer in the water and watch for the thermostat to open. The opening temperature is in the specs or stamped onto the thermostat itself. ..

Question edited for clarity I use to ride a very modified SL125 in Enduro! Yes you are correct Engine and gearbox specs..... Piston ring to cylinder bore clearance: New: 0.010 to 0.040mm / Max 0.100mm Valve clearance (inlet): 0.05mm (when cold) Valve clearance (exhaust): 0.05mm (when cold) Idle speed: 1,300rpm (+/- 100) 25 more rows • Feb 16, 2011

Honda XL125S Specs and Info (1979 to 1985)

White Dog Motorcycle Accessories https://www.whitedogbikes.com > whitedogblog > motor...

xl 125 valve clearance - Vintage Dirt Bikes

ThumperTalk https://www.thumpertalk.com > forums > topic > 899863... Jul 22, 2011 - (removing plug makes engine easier to turn over by hand) Rotate crank (under that left side cover) counterclockwise until the T lines up with a ... Valve Adjustment and the famous "T" mark - XR/CRF80-200 Apr 24, 2006 1985 Honda XL350R TDC Valve Adjustment Question Oct 4, 2019 xr 350 84-85 intake and exhaust valve clearances Oct 23, 2012 85' XR 350 Valve Clearances (New to me) - ThumperTalk Jan 19, 2012 More results from www.thumpertalk.com Here is the Service Manual for it https://kjaer.com/wp-content/uploads/2019/06/XL125-XR125-XR150-Service-Manual.pdf ..

No not hard, but is a job for the dealership. The collision sensor needs to be found, checked and reset otherwise when you connect the new one, it will immediately explode and deploy. The ECM and BCM computers merely transmit the signal to deploy, so they don't need replacing. https://www.google.com/search?q=how+car+airbag+works ..

Have it scanned for dtc's and post the codes

Have you checked the integrity of the caliper seals to make sure they aren't leaking or compromised/torn? Is the problem happening on only one axle, or two? Also, how are the brake lines and/or hoses leading to the calipers? Any kinks or tears? Fluid leaks?Could be calipers that need to be replaced, but could also be other problems.What's the mileage on the vehicle and are you losing brake fluid from the reservoir and having to top it off often?

Several factors could cause a 1997 Honda Accord SE to suddenly not start when cranking:

1. **Battery**: Check the battery terminals for corrosion and ensure they are tightly connected. A weak or dead battery could prevent the engine from starting.

2. **Fuel**: Verify that there is enough fuel in the tank. If the fuel pump is failing or there are issues with the fuel system, it could cause starting problems.

3. **Ignition System**: Faulty ignition components such as the spark plugs, ignition coil, or distributor cap could prevent the engine from starting.

4. **Starter Motor**: If the starter motor is failing or the connections are loose, it may not engage properly to start the engine.

5. **Engine Timing**: Issues with the timing belt or timing chain could affect the engine's ability to start.

6. **Engine Sensors**: Malfunctioning engine sensors such as the crankshaft position sensor or camshaft position sensor could disrupt the starting process.

7. **Electrical Issues**: Problems with the electrical system, such as a faulty ignition switch or wiring issues, could prevent the engine from starting.

If you're unable to diagnose the issue yourself, it's recommended to have a professional mechanic inspect your vehicle to determine the exact cause of the starting problem.

P0360 is an issue with the ignition coils and the related systems. There is an issue with the Powertrain Control Module (PCM) not detecting a signal to one or more of the coils. The engine might not be getting the signal to fire the spark plugs and that is why it won't start. You will need to get a good mechanic or auto-electrician to look at this.

The fuel cut off switch for a 2004 Honda Pilot is located behind an access panel in the right rear quarter trim panel. It has a red reset button on top of it.

Check your coolant level and flow.

Replacing Engine Coolant Temperature Sensor on 1999 Honda Civic temp sensor feeds the signal to dash display dial.

If the engine light is flashing, you need to connect a Code Reader to it. https://www.google.com/search?q=2022+honda+700+obd+port+location Flash Codes https://www.google.com/search?q=2022+honda+700+engine+light+flashing+on+dashboard ..

Changing batteries can pop codes. Best to have them cleared. If they come back up. Check what going on.

Use a drop of Locktite blue and 97lb-ft.

Home Depot supply generic wheels for outdoor power equipment, or you can get stroller wheels off Amazon. you just need a pair roughly the same diameter with a correct size spindle diameter. https://www.google.com/search?q=small+Wheel+Assembly Lots here https://www.bing.com/shop?q=Pressure+Washer+Tires&cc=us&setlang=en and the original https://www.google.com/search?q=A00743+Replacement+Wheel%2FTire+Assembly ..

In maintenance work a tune up would include new spark plugs, if is fitted with a distributor then replace the distributor cap and rotor. if your spark plug cables are old (more than 100,000 miles) may be good to replace them. replace air filter abd cabin filter. check the hoses that carry coolant. change oil and filter. It may be a good idea to change the coolant also to change the transmission oil.

Frequently the purge valve is located on near the engine or on the engine. You can locate it by the hoses to and from it. It will be fed by hose coming from the tank and from the valve a hose goes to the intake manifold. It also has a connector to it.