20 Most Recent 2007 Infiniti Fx Questions & Answers


First focus on making sure that the seat is appropriate for your child and has done well in crash tests. Car seats are meant to fit in just about every car although if you have a small backseat you may just need to squish it in more. The type of car you have really shouldnt matter

2007 Infiniti Fx | Answered on May 18, 2008


Hi! There are no headlight relays on xantias. It's just a fuse going to the headlight vise versa. YOu may want to check on grounded or wounded wires on this. Hope this helps and thank you for using FixYa!

Infiniti Fx Cars... | Answered on Aug 27, 2010


IF THE GAS CAP IS NOT WELL TIGHTING IT WILL THAT SERVICE ENGINE SOON OR IF THERE IS FUEL LEAKING ALONG THE FUEL LINE

Infiniti Cars &... | Answered 3 days ago


That is old, check wires near the wheel could be broken, any codes?

Infiniti Cars &... | Answered on Nov 11, 2019


While the problem might be a leaky head gasket or the degassing system blocked, the cause is probably an almost blocked heater matrix...

Infiniti Cars &... | Answered on Nov 07, 2019


If it were me, I'd pull the entire sending unit all in one piece from the junkyard and install it. Bet that would solve your problem. Sounds like something in the sending unit is bad or bent or something or not in tank properly which replacing the whole unit will solve.

Infiniti Cars &... | Answered on Oct 25, 2019


Could be lots of things...fuel pump, crank or cam sensor, a relay, etc

Infiniti Cars &... | Answered on Oct 14, 2019


TRY A SALVAGE YARD OR DEALER

Infiniti Cars &... | Answered on Oct 12, 2019


What type headlamps ?
HEADLAMP (FOR USA) - XENON TYPE -..................46
HEADLAMP (FOR USA) - CONVENTIONAL TYPE -.
The headlamp operation is controlled by the lighting switch which is built into the combination switch and smart entrance control unit. And the headlamp battery saver system is controlled by the smart entrance control unit. OUTLINE NHEL0198S01 Power is supplied at all times I to headlamp LH relay terminals 1 and 3 I through 15A fuse (No. 68, located in the fuse and fusible link box), and I to headlamp RH relay terminals 1 and 3 I through 15A fuse (No. 69, located in the fuse and fusible link box), and I to smart entrance control unit terminal 49 I through 10A fuse [No. 13, located in the fuse block (J/B)]. When the ignition switch is in the ON or START position, power is supplied I to smart entrance control unit terminal 27 I through 10A fuse [No. 10, located in the fuse block (J/B)]. When the ignition switch is in the ACC or ON position, power is supplied I to smart entrance control unit terminal 26 I through 10A fuse [No. 1, located in the fuse block (J/B)] Ground is supplied I to smart entrance control unit terminals 43 and 64 I through body grounds M9, M25 and M87. Power Supply to Low Beam and High Beam NHEL0198S0101 When lighting switch is in 2ND or PASS position, ground is supplied I to headlamp LH relay terminal 2 from smart entrance control unit terminal 21 I through smart entrance control unit terminal 22, I from lighting switch terminal 12, and I to headlamp RH relay terminal 2 from smart entrance control unit terminal 59 I through smart entrance control unit terminal 60, I from lighting switch terminal 12. Headlamp relays (LH and RH) are energized and then power is supplied to headlamps (LH and RH).

Infiniti Cars &... | Answered on Sep 30, 2019

Not finding what you are looking for?
Cars & Trucks Logo

2 questions posted

Ask a Question

Usually answered in minutes!

Top Infiniti Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you an Infiniti Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Fx Infiniti

  • Fx Infiniti

Most Popular Question

infiniti fx carseat

  • Cars & Trucks
Loading...