2008 Acura Rdx - Answered Questions & Fixed issues

At TutorBinhttps://tutorbin.com/about-us/, our mission is to bridge the learning gap that exists between students and online tutors to make learning more accessible, affordable and effective. By connecting students and subject matter experts through our integrated digital learning platform, we seek to revolutionize the way knowledge transfer takes place. We aim to strategically connect students and tutors under one roof, streamlining the online tutoring market. https://tutorbin.com/about-us/

There is fluid rated for colder temps than -20,switch to that and if needed they do sell windshield washer fluid heaters for really cold temps. If all is good but the washer sprayers like to freeze,and if they are mounted on the hood,wire an 1157 bulb under the hood at each sprayer,the heat from each bulb should keep them unfrozen.

it will have codes but the scanner in use doesn't have the right protocol for reading them Indicates a faulty ambient air temp or BARO sensor so there will be codes

Pull dash and pop cluster panel.

could be the wire to the temp SENDER unit has fallen off, broken off or the sender unit is faulty

it could be the sender or the wire that connects to the sender ( a brass nut with threads that screw into the engine ) have a look at these images and you will see what they look like,please remember you will not see the threads as its screwed into the engine block. hope this helps https://www.google.co.uk/webhp?sourceid=chrome-instant&ion=1&espv=2&ie=UTF-8#q=temp+gage+sender&tbm=shop

See if the fans are working on the radiator.

have someone check your emissions

What kind of code do you mean?

Type: OBD PO238

remove cop (coil over plug) blow the sand out of the spark well unscrew spark plug, CCW, counter clockwise. RHT gap new plug to under hood sticker spec. put back, set torque to spec, 15- ft/lb most cars, look it up. alldata.com

Have to Google any codes you get ACURA OBD P1009

the line replacement would be based on cracks/expense/or difficulty to get at. Sometimes, it is much easier to replace hoses at the same time...

if the hoses are okay and not cracked or damaged, leave them.

hook wires up the way they were & tape, check all fuses, replace blown fuses, fuses may be under hood and under dash.

in the black box behind the battery

When the light are turned on, the dim lights have to be on the up position on the lever that turns the light on. I had my lever in the down position, which is for the bright lights and when pushed up will automatically put on the dim lights and fog lights when turned on. I should have realized this problem my-self.

First check to see if there is freon in the system using a/c gauges. It may just need a recharge.

2019 if under warranty bring to dealer -ice build up could have damaged gear

Open the hood and look behind the headlight housing. Turn a 1/4 turn counter-clockwise and the bulb housing should come out. Remember not to touch the bulb with your fingers.Update: Oh ok you know that you say? Then why ask? I thought I'd help. You're welcome. Put a little effort out and Google your answer then. See you next Tuesday!

Chain