20 Most Recent 2003 Dodge Neon Questions & Answers


How do you know it needs a new switch ? Did you look at a wiring diagram an test the electrical circuit's ? Do you know what all is involved in making the wipers work ? Relay's etc..... Fuse # 2 20 amp .
http://www.bbbind.com/tsb-wiring-diagrams-database-results/?type=WD&years=2003&make=39&makeDesc=Dodge&model=288&modelDesc=Neon&system=1&systemDesc=Body%20&%20Accessories&subsystem=148&subsystemDesc=Wiper/Washer&docid=7705224

2003 Dodge Neon | Answered on Aug 13, 2019


Watch the video, the pump is located in the same place on all years of the Neon
https://www.youtube.com/watch?v=lhHOIwx-xXE

2003 Dodge Neon | Answered on Jul 12, 2019


Vibration at idle brings to mind a few suspects:

transmission mount(s) broken/missing
transmission internally worn
motor mount(s) broken/missing

(1) transmission internally worn or transmission mount broken/missing - test this by shifting into neutral at the next stop light. If the vibration disappears when you disengage the transmission, then the transmission is the source of the vibration. You'll have to inspect the transmission mounts - if they're ok, then the transmission is internally worn and can no longer smoothly "slip" while idling in drive.
(2) motor mount broken/missing - also test this by shifting into neutral at the next stop light. If the vibration persists, then the transmission is exonerated, and the vibration is coming from (under) the engine. The rubber part of motor mounts commonly crack/break and or pop out and are lost.

A photo of the front motor mount for the 2003 Dodge Neon:


10_18_2011_3_35_36_am.jpeg

2003 Dodge Neon | Answered on Nov 01, 2018


Well it will reset, but it will keep coming back i you don't take it to a mechanic and also get your oil changed and oil filter. Hope this helps!?


Please rate solution - Thanks.

2003 Dodge Neon | Answered on Mar 31, 2018


connect the solid green with the solid green. and the others. if you have the connector with wires just match the position right and left one by one

2003 Dodge Neon | Answered on Mar 10, 2018


I think you could use this manual method instead.. My nephew use it to repair my car and it's totally repaired now. Here's the website he bought it from. www.reliable-store.com

2003 Dodge Neon | Answered on Mar 07, 2018


unlikely for a new tranny
reverse gears are spur cut gears so that means that if the teeth are not properly aligned they hit on the ends of each other stopping engagement
you can get around it but selecting neutral , letting out the clutch the depressing the clutch again and make the selection
that sets the gears spinning and makes for alignment for selection

2003 Dodge Neon | Answered on Dec 24, 2017


Bad connection. Could be ground or hot side. Check all battery cable connections and ground connections. Also check the charge wire from the alternator to the fuse box.

2003 Dodge Neon | Answered on Dec 17, 2017


running the fault codes will help
problem when cold indicates ambient air temp sensor or BARO sensor is faulty

2003 Dodge Neon | Answered on Dec 14, 2017


That can be a bad strut mount, bad ball joint, bad tie rod end.

2003 Dodge Neon | Answered on Oct 21, 2017


This is no job for just a so called handy man. You need a professional or you could have afire or a more expensive repair.

2003 Dodge Neon | Answered on Oct 18, 2017


The circuit you hear powering up for two - five seconds should be the fuel pump priming the fuel system . What type transmission ? manual or automatic ? Do you know what a wiring diagram is an how to read it ? Free wiring diagram's here http://www.bbbind.com/free_tsb.html Enter vehicle info. Year , make , model and engine size. Under system click on engine then under subsystem click on starting .Click the search button then the blue link . If you look at this diagram you will see the fuse at the top of the page that powers the ignition switch . You will see the ignition switch , the starter relay and the PCM - engine computer ! The PCM supply's a ground to energize the starter relay . But only if it see's that the transmission is in park or neutral ( automatic trans ) Or the clutch switch is closed ( manual trans ) .To see this you would need to go to transmission controls under transmission/transaxel . Plus the PCM will not energize the relay if there is a anti-theft system problem . You could do testing right at the relay base (where the relay plug's into ) With a test light ,voltmeter etc... Watch this video on relays

VEHICLE RELAYS Testing from the relay base
VEHICLE RELAYS Operation Diagnosis

Find out what's missing .

2003 Dodge Neon | Answered on Oct 18, 2017


If you mean you want to start the car without the switch interfering, yes, you can do that by cutting the tan wire from the starter relay and grounding it to the chassis. This will allow the engine to start in any gear. However, the switch does a lot more that neutral safety. It tells the pcm what gear you want to choose. So, if the switch is bad, it could give the pcm bad data about your selection. Bottom line is, the car should start (please have your foot on the brake when you try), but the transmission may not work as expected.

0996b43f8023995b-lgd0on5kwttmxgdtmabjr2fz-5-1.gif

2003 Dodge Neon | Answered on Sep 23, 2017

Not finding what you are looking for?
2003 Dodge Neon Logo

1,129 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2002 Dodge Neon
2002 Dodge Neon

839 Questions

2004 Dodge Neon
2004 Dodge Neon

733 Questions

2005 Dodge Neon
2005 Dodge Neon

688 Questions

2000 Dodge Neon
2000 Dodge Neon

598 Questions

2001 Dodge Neon
2001 Dodge Neon

534 Questions

Top Dodge Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Neon Dodge

  • Neon Dodge

Most Popular Question

2003 dodge neon not shifting into higher

  • Cars & Trucks
Loading...