20 Most Recent 2005 Nissan Murano - Page 2 Questions & Answers

its behind your fuse panel but upwards. You can see it if you get your head down and kiss the pedals. Your definitly gonna have to do some dash diving though it you decide to mess with it.

Its under the dash on the drivers side, all the way to the left. Its light blue and a pain in the a@$ to get to

2005 Nissan... | Answered on Dec 21, 2016

you will need a workshop manual to see how to set the mode for the scan to make the connection to the scan tool

2005 Nissan... | Answered on Oct 01, 2016

I would think the door lock actuator motors are sticking, they are very lightly built little toys.

2005 Nissan... | Answered on Sep 12, 2016

Ok, go to your local auto parts store, rent an axle puller, or you can try a prybar.
The axle puller is a safer way to go. It looks like a dent puller or slap hammer.
Good Luck

2005 Nissan... | Answered on Aug 16, 2016

Yes you need to change your in cabin filter. Wal-mart sells them for around 15$ if you buy the one from Nissan it is around 50$. You will find many recommendations for self install that say to take apart the dashboard and 7 or so screws. Skip that the easier solution is to slide out 2 hinge pins that hold the glove box in place they are located on the underside of the glove box. You will find there is a string that holds the detached glove box so don't yank too hard once the hinge pins are out. Support it if possible so it's not dangling in mid air. There are some clips that cover the flap that holds the filter in place a flat screw driver will make prying those easier. Note orientation on uninstall of old and reverse procedure with new filter. Reinstall flaps/clips then glove box. Viola Saved yourself 129$ dealer install..

2005 Nissan... | Answered on Aug 16, 2016

You need to first have the transmission control computer tested for fault codes, this involves a trip to a transmission repair shop or a new car dealer service dpt.

2005 Nissan... | Answered on Aug 11, 2016

Your problem is most likely caused by a jammed AC/Heater temperature control blend door and or blend door electric actuator motor. The door is stuck in the heated air position and can't move to divert the air flow across the cold AC evaporator core. In most cars this problem requires the entire dash assembly be removed to replace the parts.

2005 Nissan... | Answered on Jul 14, 2016

Could be a plugged up fuel filter not letting enough fuel to the engine at high RPMs

2005 Nissan... | Answered on Jun 22, 2016

is it the steering lock try jiggling the steering wheel while gently turning the key.

2005 Nissan... | Answered on Mar 07, 2016

The immobilizer is many parts. The key, ignition switch, the BCM, and the PCM. You can find codes for this on the internet. too many to list. It takes a scanner to retrieve the codes for security.

2005 Nissan... | Answered on Mar 03, 2016

First check to see if something came unplugged,or not all the way plugged in. because if all the trouble is coming from steering wheel.That would be my guess. Or there could be a short in the plug. Trace the the wires going to steering column to see if you can find the loose or pinched wires.

2005 Nissan... | Answered on Feb 10, 2016

4 digit code can only be entered when 4 dashes appear
Or ----
To enter code 1134

Button 1 = first digit of code press once =1
Button 2 = 2nd digit of code press once = 1
Button 3 = 3rd digit of code press 3 times =3
Button 4 = 4th digit of code press 4 times = 4
Press and hold AS button until radio activates

2005 Nissan... | Answered on Feb 03, 2016

I will tell you the cause but some don't want to hear the answer or will swear they are not doing it. 
If the Intelligent Key fob is placed in a pocket, back pocket, purse or tight pants and (within range of the car) something presses against the unlock button for 3 seconds the windows will go down. Once the 3 second thresh hold is reached the windows start down. They will continue to go to fully open unless the button is released. In other words, the windows can be opened anywhere from a crack to fully open.
Try it. Take the Intelligent Key fob and walk within range of the car. Stop. Hold the unlock button down for 3 seconds and watch what happens. The windows start down. 
If the car is re-locked using the Intelligent Key fob the windows remain down. You have to physically go and turn on the ignition and raise the windows.
Front window operation with the Intelligent Key can be found on page 3-22 middle column near the bottom of the 2007 Nissan Murano manuel.

2005 Nissan... | Answered on Jan 27, 2016

were you able to get this resolved ? if yes, can you please share the solution..i too have the same problem with my 2003 Murano.

2005 Nissan... | Answered on Dec 24, 2015

Rack the gear lever from park to drive and back again to park.

2005 Nissan... | Answered on Dec 15, 2015

Not finding what you are looking for?
2005 Nissan Murano Logo

528 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Nissan Experts


Level 3 Expert

85222 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Murano Nissan

  • Murano Nissan

Most Popular Question

05 murano 150000 turns over but wont

  • Cars & Trucks