20 Most Recent 2006 BMW Z8 Questions & Answers

HI SOUNDS AS IF THE CONNECTOR ROD HAS COME OFF THE LOCK FROM THE INSIDE OF THE DOOR YOU WILL NEED TO TAKE THE PANEL OFF TO SORT IT

Is the Engine Coolant level correct? Number one cause to no heat is low water.

Hi there, I think you might have a main fuse that is blown or a main relay not working. Check also all earthing points as well as the ecu earthing points could have been damaged or having poor contacts.
Let us know how you get on.Cheers.

These keys have inbuild sensor in them these can be made by the dealers only or you need to replaced the whole locking unit which will cost you more , So its good to contact the dealer ,it is the problem BMW you need to contact them and prove the car is your and run through lot of process and there no other local lock snith on your car ..................

Power the car's electrical systems with another car using jumper cables attached at the connection point and a good ground under the hood. That should make the trunk release work.

no thats's just a futuristic name given by BMW. otherwise it doesn't mean the pattern that ur suggesting.

Question edited for clarity and spelling. https://www.google.com/search?q=bmw+e36+convertible+roof+not+working ..

If you have a multimeter remove and test the fuses for continuity (OHMS) as fuses can look OK but they have blown. If your replacing fuses ONLY replace the with one of the Same colour and Amp rating.

Yes, Bimmerfest Forums are a great resource. https://www.google.com/search?q=BMW+325ci+vacuum+hose+diagram ..

Question edited for clarity. changed your Poly Vinyl Chloride (PVC) into Positive Crankcase Ventilation (PCV), and added some punctuation to make real sentences. Your car is run by computers, the computers have diagnostics and will tell you what's wrong. You can't guess faults like you have. A Professional Grade Scan Tool computer can diagnose all the computers, modules, sensors and systems in about 40 minutes. It can even record what happens and what goes wrong as you are driving! https://www.google.com/search?q=mobile+auto+electrician+near+me ..

http://www.bing.com/videos/search?q=power+window+switch+wireing+for+a+BMW+x3+2004&FORM=HDRSC3

https://cararac.com/blog/bmw-no-crank-no-start-problems-and-solutions.html This will give you a few ideas of what to look for. Make sure you are getting battery voltage to the fuse box.

To turn off HDC on a BMW, all you have to do is press the HDC button located on the center console. The button will have an image of a vehicle going downhill with a speedometer above it, and you'll know it's off if there are no lights illuminated above it. If you ever want to turn the system on again, just press the button again.

Since you fixed the fault by scan advice and was ok and on testdrive another limp mode came up, just check again with your scan to see what is the possible cause for it. Probably the crank sensor.

6 years different and a different series? If only life was that easy! Some BMW have a mechanical pump driven by the serpentine belt, and some have an totally electric powered pump. Just buy one for the model you have. https://www.google.com/search?q=2012+BMW+535i+water+pump or https://www.google.com/search?q=2006+BMW+330i+water+pump Rock Auto are a good suppliers, have images and different makers and 'qualities'. https://www.rockauto.com/en/catalog/bmw,2006,330i,3.0l+l6,1431850,cooling+system,water+pump,2208 ..

Check the basics first. Is battery fully charged? This is the most common reason for a no crank, no start. What exactly does it do when you turn the key? Nothing at all, no lights, no 'click' as you turn the key. A slow lazy crank?

try this link https://fuse-box.info/bmw/bmw-3-series-e90-e91-e92-e93-2005-2013-fuses-and-relay

https://fuse-box.info/bmw/bmw-3-series-e90-e91-e92-e93-2005-2013-fuses-and-relay