20 Most Recent 2006 Nissan Murano Questions & Answers

To change the language you just press the "setting" button and go to "systemsettings" (3rd from the top) and then choose "language /unit" (top option). This will generally let you switch between English/French. Haven't ever seen a Japaneseoption. It is a Japanese import so it is ALL in Japanese.

2006 Nissan... | Answered on Mar 24, 2019

Did you replace the sensor you're? Was the code erase?

2006 Nissan... | Answered on Feb 06, 2019

This could be the adjuster screw. Park you car close enough to a wall or any other reflective surface and "mark where the beam is hitting the surface, then try turning the screw and gauge which direction the light beam moves. Adjust it to suit.

2006 Nissan... | Answered on Feb 04, 2018

looks like the ballast has gone if it blows the fuse, or there is a short in the wring, remove the plug to the ballast and try fuse again if it does not blow when on then its the ballast. if the seal on the unit is damaged in any way water can damage the inside.

2006 Nissan... | Answered on Dec 27, 2017

If your car has 2 fans one should come on when you turn the A/C on, it should have Relay associated with each fan. The other fan will come on when engine reaches operating temperature. If the Freon pressure is low the low pressure switch could be taking it out.( Not likely but it happened to me with a Cobalt once. This may seem odd but if your alternator is putting out correct voltage, the computer could try to conserve power and be shutting it down. I lost A/C and steering assist and interior lights.) The compressor/clutch could be going bad. Belt may not be adjusted right but normally you will hear it.

2006 Nissan... | Answered on Aug 06, 2017

99% of vehicles they are right above where your passengers feet are. typically 3 screws hold em in there and a connector. your owners manual may show how to change the cabin filter. do that while youre in there too.

2006 Nissan... | Answered on Jul 21, 2017

You will need the dealer on this, sorry but there is substantial testing needed to correct this malfunction, this testing requires special tools that only the dealer will have..

2006 Nissan... | Answered on Dec 28, 2016

Certain brands of remote starters come with a switch that is designed to temporarily disable the remote starter. The switch may be under your dash on the driver's side, or in a fusebox. It is NOT designed to be easily accessible. Many times it gets bumped accidentally, and all you have to do is switch it back on. Could the mechanics have accidently hit it

2006 Nissan... | Answered on Nov 03, 2016

The system is computer controlled and you need to run the diagnostics with a scan tool to see what shows up.

2006 Nissan... | Answered on Nov 01, 2016

Google found this:
"To reset the maintenance interval, select the Reset and push the ENTER button. Next, press the BACK button and select REMINDER 2 to reset the tire rotation. select theReset and push the ENTER button. Turn the ignition off and then start the engine to verify the indicator has been reset."
and here's a YouTube: https://www.youtube.com/watch?v=K3KjMfuGp5c

2006 Nissan... | Answered on Aug 24, 2016

Not finding what you are looking for?
2006 Nissan Murano Logo

351 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Nissan Experts


Level 3 Expert

85222 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Murano Nissan

  • Murano Nissan

Most Popular Question

2006 nissan murano cvt slipping first 3

  • Cars & Trucks