20 Most Recent
2000 Mercedes-Benz CL-Class Questions & Answers
Heat blows cold when idling
Most cars today use vacuum to operate the blend doors in the heater box. It is possible that there is a leak or crack in the vacuum lines leading to your heater control and when at idle, the vacuum level is not enough to keep the door engaged. They are spring-loaded and will change to a default position when there is no vacuum present.
2/29/2016 2:51:01 AM •
2000...
•
Answered
on Feb 29, 2016
My car completely died while driving and now no
run fault codes to find failed sensor /servo.. Have the battery load tested as it may have a broken bridge between plates or a dead cell. Check fusible links near the battery are complete and not blown
10/26/2013 9:48:11 PM •
2000...
•
Answered
on Oct 26, 2013
Need fuse diagram for 2000 cl55
W215: The second generation of the CL is the
W215 - chassis coup? of 2000-2006.
W215 01 - Fuse Box & Relays layout04 - Fuse & Relays Trunk05 - Fuse CockpitFor additional details about
Mercedes-Benz Class CL55 AMG, CL500 and CL600, or if you don't have this document visit our Owners Manual link to check and download this file in PDF format.
I hope this helps, and just keep in mind that your feedback is important
and I'll appreciate your time and consideration if you leave some
testimonial comment.
Have a nice day and thanks for using FixYa.
Jose.
3/24/2013 6:03:27 AM •
2000...
•
Answered
on Mar 24, 2013
Driver door doesnt work
could be that switch in door has loose connection or maybe bad. If it was a fuse none of the doors would work... hope this helps and if so please rate my post and good luck.
8/15/2012 11:24:39 PM •
2000...
•
Answered
on Aug 15, 2012
Looking for good car with bad engine
why you want bad engine good car.bad engine going cost money to fix if you got good engine for car you are good to go.
11/20/2011 11:38:28 AM •
2000...
•
Answered
on Nov 20, 2011
When i turn the steering wheel to the right get
There are bearings on top of the strut. this is probably your noise. It's not hard to remove the strut, three nuts on top and two bolts on bottom, but you will need a coil spring depressor to remove the bearing plate at the top of the strut.
2/6/2011 1:18:48 PM •
2000...
•
Answered
on Feb 06, 2011
I have a pleasure of owning MB CL 600 from year
Hi! Adjustment of the mirror on the driver's side when on reverse is definitely unusual. You will have to have the wirings checked for the reverse is triggering the side mirror. Regarding the block heater, yes it is possible to put one but be sure that an expert will do this for this is a sensitive matter. Hope this helps and thank you for using FixYa!
9/2/2010 9:17:54 AM •
2000...
•
Answered
on Sep 02, 2010
Not finding what you are looking for?