20 Most Recent 1991 Mitsubishi Precis Questions & Answers

glow plug relay in the engine bay fuse box, check this they wear out over time.

i condem all the sensor and circuit of the module of the glow plug as well as rha relay

checkk in the engine compartment under the biboca the pharafuseta

yes, by shorting the diagnostic control module test lead, it will then blink the airbag light and output the code..

you might want to try to prime the fuel filter. Open the bleeder - 10mm- and press the pump. See if you have air in the line.

Connect a scan tool and the DTC code will tell you the issue.. https://www.google.com/search?q=4m40+engine+neutral+light+blinks+continuously ..

Check the clutch disengaging properly ...............

Some things to check:

• CV axles (a telltale sign of bad or wearing axles is noise)
• Suspension bushings (sway bar bushings, etc)
• Motor mounts (including transmission mounts)
• Control arms/ball joints (some aftermarkets fail out of the box)
• Strut mounts (worn or faulty strut mounts can cause noise)
• Proper torque spec for all suspension components

under left side of dash

follow this link and click on torque tables and look up your vehicle http://www.speedwayautoparts.com/index35.htm

Question edited for clarity. No one has documented how to do it, so basically you remove the door panel and look. There are spares and parts schematics in the link. https://www.google.com/search?q=mitsubishi+fuso+fm557+replace+window+regulator ..

You have a module issue, but which one, Throttle Position sensor, Throttle body, MAF, Crankshaft, or Camshaft, or a bad connection. An auto electrician with a pro grade scan tool can diagnose. https://www.google.com/search?q=mobile+auto+electrician+near+me ..

can be something other than switch -----------http://mmc-manuals.ru/manuals/pajero_sport_iii/online/Service_Manual/2017/35/html/M135202550030702ENG.HTM

Question edited for clarity, turned around, add magic word. In the link https://www.google.com/search?q=Mitsubishi+M3+Torque+specs+for+L3G14+head ..

Well, you need 3 things for an engine to run; air, fuel and spark. Air from the air ducting through the air filter, the fuel from the pump usually in tank to fuel filters {pressurized} into the injectors for fuel. Spark is a bit trickier; you have a cam sensor, crank sensor, coil packs, spark plugs. There are more components in each of these 3 classes so unless you are familiar; it's best to take it to a mechanic.

250nm

What's code 19 Line PRS.SHT on lancer 2005 ?

Haynesmanual at partstore