20 Most Recent
2005 Chevrolet Cobalt - Page 6 Questions & Answers
What can I do to get key out of ignition
im hoping that gm has sent you a recall notice on all chev 2005 cobalt ignition switch?? they are replacing all made in that year at no cost to you. ive been on waiting list for past two months should be soon. this should solve all your ignition issues once its replaced. seems that as it is now the car will sumtimes be in "run position when is not supposed to be . this could be why you have key" issues. if you look closely you will c that the ignition where the key is inserted isn't quite lined up inside the steering columm . at least that's how mine looks
Removing the cover from the radio and heater console
The bezel surrounding the radio and heater/AC controls is held on with 6 tension clips. It also has tabs at the top that are held under the adjacent horizontal trim pieces.
Remove the horizontal trim pieces on each side of the radio bezel using a small plastic pry tool. They will pop off fairly easily. Then simply use the pry tool to work your way around the radio bezel and pop it off as well. This will expose the heater control that you need to replace.
Tacoma 2006 p0420
420 form hell.
are you required by law to fix thaT. SURELY I'D NEVER KNOW.
What it means i lazy CAT
or engine is running real bad. or both.
that is what it means.
420 is the CAT monitor DTC test.
and will fail if..
engine runs bad.
front 02 is bad.
rear o2 is bad, in that order.
if all that order? is IN ORDER>
the the cat is NO GOOD..
02 means the OXYGEN SENORS, 02 name in physics,
oxygen like to pair up atomically (due to valence)
My Drivers storage compartment needs to be replaced.
Open your glove compartment up push the edges that are towards the back in with some force and drop the glove all the way down and all the screws holding in will be exposed. Just remove all the screws and pull it out. Also forgot to mention there is a string attached to the right side of the glove that is clipped in , that must be removed as well
Heater fan switch is broken on my '05 cobaltI need to know how to get at it
Your must replace the entire control assembly
you start buy removing all the trim pieces near the stereo starting from one on the outside and then the one surrounding the steer and control unit. You can go to any auto parts store and by the tools to help pry the pieces of so that way you don't break them. When you pry on the make sure you pry straight towards you gently with pressure so they don't break. Once all off there should be 2 to 4 screws holding it in. Remove those and out it will come easily. Once out just disconnect it and install the new one and reverse the steps and your all set.
Alarm goes off when car is unlock
larm should go off when keep is in ignition, unless you hav and after market alarm in your car, if so you may need to have it removed
Why does reduce engine power light comes on chevy
That is a hard problem to pin point without knowing what codes the computer has stored. It can be any number or sensors or engine problems.
You can go to most auto parts stores and they will pull the codes for you for free.
No ignitoin intrface to ecm
This is due to the security system failing. Very common on GM vehicles and hard to diagnose without the security light coming on to let you know. Look at this website, may help you out
http://vatspasslockpasskeysecurityhelp.yolasite.com/
Not finding what you are looking for?