20 Most Recent
1995 Pontiac Trans Sport Questions & Answers
Ho to replace Harmonic Balancer/Crank Pulley
the pulley will be either pressed on or bolted on
if pressed on you will need a harmonic balancer puller to get it off and space to swing a hammer to put it back on
if bolted it will be torqued to up to 90ftlb so holding the crank to undo the nut is a problem so get a 1/2 " impact gun for the job
you will need space for the tools so look at what has to be removed first
next there is a crankshaft position sensor behind the pulley so be careful with wires in that area
some engines have the pulley bolted to a crank hub with 3 or 4 small bolts in which case the job gets simpler
the item to watch out for is the drive key in the crank shaft as it can fall out of place and fall inside the seal especially when refitting the balancer
Where is ABS Module on a 95 Pontiac Transport SE?
The location of the unit is under the dash by the steering column. In order to check it you would need an ohmmeter to properly test the operation of the unit. Once you have located the unit repost or comment on the question again and I'll post proper documentation on testing procedures.
Not finding what you are looking for?