you have to check the battery of your remote control key,or get your spare key and try to open the car with remote.if the problem is not corrected,maybe the das control module is deff.better to send your car to your dealer,ty
yes you can replace it yourself easily.it only takes about 40 minutes to change and the easiest way to know where to look for it is to follow the top hose for the readiator to the motor.there will be a clamp to remove the hose and then there will be 2 bolts that hold the housing on and you will see the thermostat under the housing when you pullit out
HI ,here are some comon isues for your problem ,tires must be in very good condition and balanced by a recogniced shop ,Before you perform a wheel alignment check the auter tie rod ends ,any litlle wear will make your car shake .Good Luck
post all things that fail and work both
all maters
engine starts , runs , drives ok ,day or night?
all other electrical things on the car ,as in ALL do in fact work correctly?
or just the RADIO on the car fails.
many cars now the RADIO is part of the CAN , the car Area Network. and if that fails so does the RADIO.
if is in fact a factory RADIO there from MB.
what to do.
well
check all fuses first. never skip the easy first step and a 50cent cure..
next scan the USA? OBD2 scan port, and look for Radio errors
like COMM failures codes.
can I assume this RADIO is not SDAR , satelite radio
if is did you path the subscription bills? $$$$$$
or
the RD is base Radio and both are in fact CAN bus controlled
so yes, it must be scanned first, after fuses
sorry this is no simple 80s radio, not at all
and is antitheft protected too.
i request this post be moved to cars and not computers.
here is more than 1 fuse, the RD shows 2, F1 and F2
my online docs, are not so good, on all MB.
get the car scanned in any shop.
see the DTC error codes. next.
Question edited for a lot more clarity.Question moved to model category.Sometimes they are just on, and sometimes the SRS will flash. Connect to a pro grade scan tool computer and look for the diagnostic trouble codes associated with the fault status.https://www.google.com/search?q=Mercedes+W169+SrS+system+light+on..
Question edited for a lot more clarity, and add maker.
Question moved to maker category.
These are all function of the Body Control Module. You need an auto electrician with a pro grade scan tool computer and access to factory technical bulletins.
https://www.google.com/search?q=mobile+auto+electrician+near+me
No clues in here.
Immobilizers are designed to prevent what you are needing done. There is no easy way around it. Your best bet is to call a lock smith to cut you a new key and program it to work with your vehicle.
'bonnet', a fellow resident from UK, or maybe Australia. :>D
You normally can't disable alarms as there is a computer in-between the switch and the light on the dash. You have to fix the fault, not find a way around the problem.
The easy way is to connect a professional grade scan tool computer, check for codes and read the data that is registering the problem.
Full 'year make model' in all questions please. Some issues are known issues and can be searched.