20 Most Recent 1995 GMC Jimmy - Page 6 Questions & Answers


First check if the glove box light is on while the box is closed. Also check the coutesy lights, the trunk lights etc. If everyting is ok you will need to use a tester light between the batery's negative post and the negative wire while you take out the fuses one by one until it turns off to find which circuit has the problem.

1995 GMC Jimmy | Answered on Nov 20, 2013


You can buy used replacement column switches online for a good price.

1995 GMC Jimmy | Answered on Nov 06, 2013


You can buy used tail lamps online for a good price.

1995 GMC Jimmy | Answered on Nov 06, 2013


Check the evap system /canister behind the drivers rear tire,the brackets rust out and pull lines off.also check front purge valve on top of the gas tank,reach up on top of tank by end of back door and see if its wet.Im assuming you checked for leaky steel lines.also check the fuel pressure regulator on the engine.My 2 95 blazers have had these problems over the years

1995 GMC Jimmy | Answered on Oct 22, 2013


maybe you have a big vacuum leak and purge solenoid is open

1995 GMC Jimmy | Answered on Oct 18, 2013


trace power wire back to source.may be short in wire or another bad switch ahead of it.

1995 GMC Jimmy | Answered on Oct 17, 2013


use multimeter to probe terminals of switch , if check engine light is on ,have put on scanner.

1995 GMC Jimmy | Answered on Oct 17, 2013


raw fuel. = black smoke , and its dripping liquid fuel out exhaust ports. (a fire bomb it is...danger)
is engine stock? (like day one out of factory)
for sure the injectors are stuck on, or being told to by ECU.
the only question is why !
Is this TBI car or MPI (1 injector or 4)
must be G16B MPI. (you said Injectors....)
so do the injector balance test.
you key on and off and look at pressure drop with injectors
unplugged 1 at time. you find one that leaks ,easy that why.
google injector balance test, youtube has many to see.

changed what does change mean
new
used
hotrod injectors
rebuilt. (i hope this) and are the correct PN injectors.

1995 GMC Jimmy | Answered on Oct 07, 2013


Transfer case module is located in the center of the dash under the panel behind lighter and ash tray

1995 GMC Jimmy | Answered on Oct 02, 2013


like I see the problem ,the most common is belt not tight enough or alternator or battery
with a voltmeter check the battery voltage more then 13 volts. test battery with a load test

1995 GMC Jimmy | Answered on Sep 28, 2013


One some versions there is a shrader valve under the switch, you just remove the switch and install the replacement. On others you have to discharge the freon first then recharge the system.
You might be able to look at a rebuilt compressor to find out.

1995 GMC Jimmy | Answered on Sep 02, 2013


You mean like a pressure switch ?

1995 GMC Jimmy | Answered on Sep 02, 2013


check engine fuses

1995 GMC Jimmy | Answered on Sep 01, 2013


what do you need to know

1995 GMC Jimmy | Answered on Sep 01, 2013


Bad "o"ring on filler tube

1995 GMC Jimmy | Answered on Aug 23, 2013

Not finding what you are looking for?

991 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2000 GMC Jimmy
2000 GMC Jimmy

1,327 Questions

1997 GMC Jimmy
1997 GMC Jimmy

1,100 Questions

1998 GMC Jimmy
1998 GMC Jimmy

1,105 Questions

1999 GMC Jimmy
1999 GMC Jimmy

1,080 Questions

2001 GMC Jimmy
2001 GMC Jimmy

819 Questions

Top GMC Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Jimmy GMC

  • Jimmy GMC

Most Popular Question

hot air coming from under dash nothing

  • Cars & Trucks
Loading...