20 Most Recent 1985 Mercedes-Benz S-Class - Page 8 Questions & Answers

http://www.autozone.com/batteries-starting-and-charging/starter/mercedes-benz/s430/2000/8-cylinders-4-3l-mfi

you need to replace the pads as a set not just one wheel, you will also need to replace the sensors with the pads they usually come with the set

the anti theft may be tripped and dealer has code if this is the problem.

http://www.benzworld.org/forums/w221-s-class/1528377-how-reset-service-d-reminder-s550.html Try the above link. Read it all and you should get there. Good luck

Window relays are built into the master switch. Didn't understand the last part. But as far as the stopping up and down, this is built into the motor. No adjustments. It has a heat sink in it .

seat swabs ( backs ) are normally held in by bolts underneath at the bottom and then just lift out at the bottom and up towards the back window

sounds like a lock barrel problem or maybe the keeper has moved slightly. It will be a matter of adjusting the keeper slightly or replacing lock cylinder I think Good Luck with it

Wild guess bad ignition switch.

The most likely cause of the gear shift not moving from park is a faulty brake light /pedal switch. You need to depress the brake to remove from Park and or select other combinations. With this switch failed you will not be able to do this. If your brake lights do work then there could be a second switch in the pedal. Many manufacturers use a separate switch for this.

depending on which you have,there is 1 or 2 screws on the back,there is also a clip that needs to be pushed,then it slides out

You need to get the car pass on the scanner and identified wish code you got and see wish wheel sensor for the abs broken good luck pierre and thanks for using fixya