20 Most Recent 2000 Ford Focus Questions & Answers


Check the user manual, it will show position of fuse box and location of fuse 64 With the correct amperage for that fuse.

2000 Ford Focus | Answered on Dec 03, 2019


Hi there's this website something like reliable-store and it is very amazing for manual for repairing servicing anything
someone on fixya recommended it to me and I thank him even today
They have full manuals and it's verrrrry cheap and mine
I got free in offers
3rd time I bought it, I also had an issue with the file so the girl replaced it in 30 mins
there is one website more but i don't remember its name it was 2 years back bitman something link this
Try these out brother

2000 Ford Focus | Answered on Nov 25, 2019


I am betting on a tire balance. I have had tires out that only vibrate at 60; they were pretty smooth at 75.

2000 Ford Focus | Answered on Nov 05, 2019


there is a fuse box under the dash on the driver side close to the door on the driver side up by the brake pedal at the top and there is one under the hood as while.

2000 Ford Focus | Answered on Nov 03, 2019


Very good write-up. I certainly love this website.
<a href="http://lambingantv.co"> Bepanah Pyar </a>
<a href="https://bepanahpyaar.org/"> Vish </a>

2000 Ford Focus | Answered on Aug 16, 2019


Don't waste your money on unnecessary sources and unwanted repairs.. get this manual online at www.reliable-store.com u will know
whether to repair or not, service it, and how to repair etc

2000 Ford Focus | Answered on Aug 14, 2019


Yes vachum controls all the doors on it go to http://www.alldatadiy.com and buy a subscrption there for your car they will have all the parts location for you there, most likely the blend door vac. motor is bad.

2000 Ford Focus | Answered on Jul 11, 2019


speed sensor it on the back of the gear box cost about £35.00
from ford

2000 Ford Focus | Answered on Jun 09, 2019


2795

2000 Ford Focus | Answered on Jun 09, 2019


Why not try a used ECM? and get the key from the same vehicle if it is chipped.If yours and it are chipped,cut a non chipped key for your ignition.and once the used (known good working unit) ecm is installed ,use the nonchipped key in your ignition while holding the ecm key next to your ignition switch to start the vehicle.Once started run it and see if the same codes come up.If all is OK tape the chipped key under the plastic at the ignition lock and use non chipped keys now and pass the smog.

2000 Ford Focus | Answered on May 17, 2019


its fuse 46 and it should be a 15 amp according to the manual as i have the same car as you hope this helps

2000 Ford Focus | Answered on Mar 01, 2019


You might have a power trunk button try to look for it also you should download your owners manual at ford owners.Com it should give you the location and your fuse box diagrams and other information now the seat you will have to unbolt it the side panels pop out and are held in with clips the bottom of the seat may pop out by pushing inwards but this also could be bolted in look around the bottom also when you pop out the side panels you might gain accessories to the rear deck bolts that the third brake light is attached to and radio speakers if applicable anyway you should be able to axcess the trunk by this path it's going to be a pain in the gozompus but you can get in I don't own a focus but from memory of getting stuff in junk yards I'm trying to help you so excuse me if I'm wrong here or there so pull out the door seals that go around the door opening there might be panel bolts in the frame and seat bolts behind once you get to them you should be able to get to the levers also I know that the lock was possibly frozen when you put in the key knocking in the weather shield and jamming the lock cylinder you can try putting the key in and keep trying to turn it while banging the trunk where the cylinder is and you might jar it loose that metal flap has a spring on it and those 2 things are stopping the key from turning the other alternative is to try using a very small screwdriver to try to move it out of the way so the key will turn you have to be gentle here digging in like crazy will not help and last of all if you can't get in then use a drill and destroy the cylinder completely and a long screwdriver and a hammer will get you in you'll have to change the cylinder anyway so whack away at it if all else fails good luck stephen

2000 Ford Focus | Answered on Feb 20, 2019


How To Install Replace Rear Drum Brakes Ford Focus 00 11 1AAuto com

2000 Ford Focus | Answered on Feb 20, 2019


will the key unlock the door ?

2000 Ford Focus | Answered on Jan 14, 2019


Maybe a stray leaf, twig or other small object has been sucked into the ventilation duct, touching the centrifugal fan.
You need to pull off ducts around fan and inspect.

2000 Ford Focus | Answered on Jan 14, 2019


You'll need the computer and complete wiring harness from the DOHC vehicle. Without that, there's no way the engine will run.

2000 Ford Focus | Answered on Dec 25, 2018


On this website you find fuse box diagram description for Ford Focus mk1

Ford Focus MK1 fuse box diagram Auto Genius

2000 Ford Focus | Answered on Dec 20, 2018


May be a common ground wire problem .

2000 Ford Focus | Answered on Mar 03, 2018


https://postimg.org/image/9gkzxjvh1/

Click on the link.
You can see the fuses, not only check the fuse, check for voltage on fuse circuit, use a test light, goes hot with key on.
On the hinge side of driver door, check the wiring harness. Probably has a protective rubber boot covering, see if you can pull the boot back far enough to get at the proper color. Green wire with blue tracer should be voltage, with key on, use a test light. Also, check the ground wire, it is black. You can use a test light to check ground also. One end of test light touches battery voltage, the other end penetrates that black wire, if the light comes on, the ground is good enough for test light. The driver door is opened and closed so much, sometimes the wires break. If you make a hole in the wire, use finger-nail polish or something to cover the hole.

2000 Ford Focus | Answered on Feb 28, 2018


Here is how this works. A coolant sensor triggers the "cold start" sequence which raises engine idle, enriches the fuel ratio, and makes a few other adjustments. When problems like yours occurs it means the engine is stuck in warm mode or the engine controls are ignoring the signal to reset. The cheaper part is the coolant sensor.

2000 Ford Focus | Answered on Feb 24, 2018

Not finding what you are looking for?
2000 Ford Focus Logo

5,166 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2001 Ford Focus
2001 Ford Focus

2,580 Questions

2003 Ford Focus
2003 Ford Focus

2,002 Questions

2005 Ford Focus
2005 Ford Focus

1,196 Questions

2004 Ford Focus
2004 Ford Focus

881 Questions

2006 Ford Focus
2006 Ford Focus

825 Questions

Check Out the Latest Top Trucks Report!
Check Out the Latest Top Trucks Report!

View all Fixya Reports

Top Ford Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

gerry bissi

Level 3 Expert

4388 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual
. 2000 Focus Manual

2000 Focus

View Most Popular

Focus Ford

  • Focus Ford

Most Popular Question

answer question

  • Cars & Trucks
Loading...