20 Most Recent 1999 Dodge Neon - Page 2 Questions & Answers


It could be a siezed piston in the brake caliper. It also could be a problem in the master cylinder. More likely the brake caliper, though.

1999 Dodge Neon | Answered on Oct 12, 2015


With everything you have changed not fixing the problem, I would check the water pump and belt. You could also have something preventing the coolant from circulating freely through the engine.

1999 Dodge Neon | Answered on Aug 15, 2015


This is the wrong site for that type info

We are at home & use the site as you do

You need to purchase factory wiring diagrams
You won't find much on cars for free anywhere

1999 Dodge Neon | Answered on Aug 02, 2015


Go under the dash and bypass the clutch pedal safety switch and see if it starts.

1999 Dodge Neon | Answered on Aug 02, 2015


If you mean the pressure sensor it takes a special socket. I had to purchase the socket for my 03 intrepid

1999 Dodge Neon | Answered on Mar 30, 2015


take door panel off, inside door is window regulator. Window removed, it is 2 tracks and a motor, replace the whole unit, GOOD LUCK!!

1999 Dodge Neon | Answered on Mar 05, 2015


Check coolant temp sensor. They fail quite often and will make engine run as if the choke is on, thus killing gas mileage and perhaps running poorly. Other possibles are clogged converter or muffler.

1999 Dodge Neon | Answered on Jan 23, 2015


Yes.
There are fuses for ALL electronic circuts.
It may be bundled with something else that is also out.

1999 Dodge Neon | Answered on Jan 08, 2015


They are with the light switch. The switch could be bad. But, pull the lens, pull the bulbs, look for a screw or two. remove them if they are there. Some don't have screws and just pop into the headliner. Remove the light holder. On the back side is where the wires usually burn.

1999 Dodge Neon | Answered on Jan 06, 2015


its bad plug terminals that the speedometer cluster plugs into. common neon

1999 Dodge Neon | Answered on Nov 07, 2014


I found my own answer on YouTube!
I spent more time on removing/replacing my cluster than the actual repair. I did note this question was asked 5 years ago, but for anyone else looking for a solution to this I hope this helps. It sure did for me!

1999 Dodge Neon | Answered on Nov 07, 2014


the hydraulic slave cylinder may have let go and will need replacing. its also possible that the clutch pressure plate broke or the clutch plate. you don`t say how many miles you have on the clutch. you also don`t say if it won`t go into gear with the engine running, which indicates clutch, or with the engine off.

1999 Dodge Neon | Answered on Jul 31, 2014


check the actuator pan in a steering columnI

1999 Dodge Neon | Answered on Jun 21, 2014


go to autopart.com/brakes/brake_map.htm

1999 Dodge Neon | Answered on Jun 07, 2014


Have you checked the timing belt? Does it crank over faster than normal?

1999 Dodge Neon | Answered on Apr 20, 2014

Not finding what you are looking for?
1999 Dodge Neon Logo

321 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2002 Dodge Neon
2002 Dodge Neon

839 Questions

2004 Dodge Neon
2004 Dodge Neon

733 Questions

2003 Dodge Neon
2003 Dodge Neon

727 Questions

2005 Dodge Neon
2005 Dodge Neon

688 Questions

2000 Dodge Neon
2000 Dodge Neon

598 Questions

Top Dodge Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Neon Dodge

  • Neon Dodge

Most Popular Question

clock spring

  • Cars & Trucks
Loading...