20 Most Recent 2006 GMC Sierra 1500HD Questions & Answers

I, feel sorry for you, after reading your problem, but don't worry you visit the Reliable-Store they will help you for sure.
Best Manuals

2006 GMC Sierra... | Answered on Oct 05, 2016

thers ahh prblem of your wiring?the best u need to do replace the wiring of your fun if?still killing your battery u need to check one by one of your wiring

2006 GMC Sierra... | Answered on Feb 25, 2012

Most likely is your blend door is faulty (bad motor/broken tab?).
Defrost is the idle possition ( as it is the most important).
You may have a disconnected vacuum hose from the climate controle panel if you recently (ever?) had work done in the dash area...
But my suspicion is the blend door motor...

2006 GMC Sierra... | Answered on Sep 30, 2011

Check the battery terminals first to make sure they are tightened and not corroded, if you have a way to check the battery that would be good [ you may have a voltage gauge on the dash, when you first turn on the key it should register at least 12 volts, and not drop below 9 volts when cranking ], a load tester is the best way. If all these things are ok, then I would suspect the igntion switch is faulty as it seems you have no power to anything at times.

2006 GMC Sierra... | Answered on Mar 17, 2011

thats the beauty of the warranty,take it to a dealer and because he gets paid for any warranty work, he/she will LOOK for things that need doing......

2006 GMC Sierra... | Answered on Oct 31, 2010

On the 06 Vibe the horn is located just to the right of center, almost below the hood latch, in front of the radiator. It looks like a small round speaker...
check to make sure the wire is plugged in, it can come lose or even fall out. it is easy to check and fix.

If that does not work, my best guess would be that either the horn is blown or the wiring is messed up.

good luck.

2006 GMC Sierra... | Answered on Apr 02, 2009

Need to have your HVAC system scanned to determine what has failed in that system. Possible blend door for drivers side or maybe the system just needs recalibrated.

2006 GMC Sierra... | Answered on Mar 31, 2009

Follow the big hose/line this is the low pressure/suction side and the service port will be on this side of the system. May be on the receiver/drier or on the back of the compressor. Sorry I cant remember an exact location.

2006 GMC Sierra... | Answered on Mar 31, 2009


2006 GMC Sierra... | Answered on Dec 14, 2008

hi Bottomline 19.
all i can find out is,it might be the oil pan gasket needs to be replaced.
check this link out,its on youtube showing what the problem might be.
2001 GMC Sierra Changing the oil pan gasket
and there is more at this link.
2001 GMC Sierra 1500 HD oil residue on the oil pan and filter Google Search

GMC Sierra... | Answered on Dec 01, 2017

Does the belt have the correct amount of ribs?

GMC Sierra... | Answered on Aug 12, 2017

I suspect sun shell gear in the transmission either way the transmission will need repaired or replaced.

GMC Sierra... | Answered on Apr 06, 2015

go to the dealer and ask the parts guy for a print out

GMC Sierra... | Answered on May 26, 2014

Not finding what you are looking for?
Cars & Trucks Logo

20 questions posted

Ask a Question

Usually answered in minutes!

Top GMC Experts


Level 3 Expert

85216 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Sierra 1500HD GMC

  • Sierra 1500HD GMC

Most Popular Question

horn doesnt work 2005 pontiac vibe

  • Cars & Trucks