20 Most Recent 1998 GMC Sonoma Questions & Answers


How To Install Replace Serpentine Belt GMC Sonoma 4.3L 1AAuto.com

How To Install Replace Serpentine Belt GMC Sonoma 4.3L 1AAuto.com

on Jun 01, 2019 | 1998 GMC Sonoma

Let's say that the battery and it's cables are good and charged and tight. and clean. You walk up and unlock the car and get in and close the door ( is the security light on? ) if it is can you put in the key and turn it on and does the security light go out? If it does'nt then you'll need to reset the security system. The GM way. With the doors all closed and the driver window down, reach in and turn the key to start and let go. the security light will be on steady, between 10 and 15 minutes it'll be out. Turn the key off and turn it back on and the security light will be back on, agian wait till it goes out. Again after it's out turn it off and wait a sec. and turn it back on, the light will come back on. again wait till it goes back out. this time ( the third time ) turn the key off wait a sec and then turn it to start and if everythings alright it'll start right up or crank OK and you'll have to finde another problem but the security system is'nt going to be it. If you battery is'nt good enough to do this you need a new battery anyway and your going to have all kinds of troble till you chcnge it.

1998 GMC Sonoma | Answered on Feb 06, 2019

Does the vehicle have ABS - anti-lock brakes ? Sounds like a master cylinder problem .

1998 GMC Sonoma | Answered on Jan 17, 2018

If you have a check engine light, that means there's a trouble code stored. Get the code read and that should give you an indication of where to start

1998 GMC Sonoma | Answered on Jan 05, 2018

I think you should go for manual first after that it would be easy for you to solve your problem. I had visited this site past 2 months before for my vehicle and find it quite helpful may be you will also get something useful here

1998 GMC Sonoma | Answered on Nov 28, 2017

It's the vent valve, and it's connected to the charcoal canister near the rear axle. Might be on top of the tank.

1998 GMC Sonoma | Answered on Jul 31, 2017

016 Engine Misfire Misfire Scan Data Find someone who knows what scan data is an knows how to use it .Intake manifold vacuum leak .
Rough Running When Cold GMC Yukon

1998 GMC Sonoma | Answered on Jun 19, 2017

Dude messed up your wiring. Have the dude fix it properly.

1998 GMC Sonoma | Answered on Apr 08, 2017

Why would the wires need replacing. You can avoid a lot of extra work by just replacing the battery clamps (terminals). Just make sure the polarity is correct (Red is +, Black is negative ) Always connect the negative wire to the battery post last to prevent arcing. Wear safety glasses when working with batteries as an explosion hazard is present. Use conductive grease on battery post to prevent corrosion.

1998 GMC Sonoma | Answered on Mar 21, 2017

Not finding what you are looking for?
1998 GMC Sonoma Logo

452 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1999 GMC Sonoma
1999 GMC Sonoma

391 Questions

1996 GMC Sonoma
1996 GMC Sonoma

352 Questions

1995 GMC Sonoma
1995 GMC Sonoma

263 Questions

1997 GMC Sonoma
1997 GMC Sonoma

242 Questions

1991 GMC Sonoma
1991 GMC Sonoma

234 Questions

Top GMC Experts


Level 3 Expert

85216 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Sonoma GMC

  • Sonoma GMC

Most Popular Question

98 gmc sonoma part pa66

  • Cars & Trucks