20 Most Recent
2004 Ford F250 - Page 9 Questions & Answers
Fuze locations for the Brake light Fuze for a 2004
I suggest check on passenger compartment fuse panel / power distribution box. This fuse panel is located below and to the left of the steering wheel by the brake pedal. Remove the panel cover to access the fuses. Position 2...
Also check Position 18 for Brake on-off switch (high) and 24. Remember that this and other interesting information could find in this link for Ford Manuals.
Hope this helps; just keep in mind that your feedback is important
and I'll appreciate your time and consideration if you leave some
testimonial comment about this answer.
Jose.
My 04 F250 diesel won't
Invest in a cheap test light or make your own, test the input terminal at the starter by earthing the test light on the battery then touching the positive to the input to the starter, also test the starter activation power wire.
I just cleaned out and
Seems extremely unlikely to be related to cleaning the inside of cabin. Take it AutoZone or other auto parts store and ask them to check the error codes. Usually will do this for free. The code should point you to the problem causing the engine light.
Locate the neutral safty switch
That is consolidated with your manual lever sensor,,which is located on the side of the transmission where your shifter cable is located..
2004 f250 turbo diesel is
check the pick up pipe in the bottom of the fuel tank first ,you may find this model has an electric pump in the tank but whatever it has their is a gauze filter on the bottom of the pick up pipe check this out before you spend any cash
2003 ford f250 6.0 diesel cranks but won't
Recommend checking wiring harness to injectors and the high pressure oil pump that fires the injectors. The HPOP has a history of failing in this model truck causing a no start condition.
I have a 04 f-250
Nice discussion. Guy said he was having some issues with a slight leak, at times, under his cap. Said it was purging @ 13 lbs with the cap indicating a 17 lb pressure load. It should not purge until 17 lbs or right just under. This tells me the cap has a weak/old seal and should be replaced. He also asked about doing a radiator flush and I advised him that would be fine to do at home. I also suggested for him to check the pinch clamp on the hose running to the expansion basin as well.
Regards,
Tony
My compass and temp. gauge
Check for screws in the sunglass holder and also right behind the computer display. Many of the ford overhead consoles are not held by screws, just locking tabs. If you do not see any screws then give the console a gentle tug from the front corner. I have some pictures on how to do so (as well as a repair solution) at my website www.autoclockrepair.com
Good luck!
Check engine light came on
Check Lights have been on all vehicles since 1980
That is 31 years
So after all that time,what possible question do you have ?
You gave us now codes you had retrieved ,if any,no vehicle
problems,drivability wise
Not finding what you are looking for?