How do I replace heater hose fitting elbow
Tools: 10 mm 13,mm,15,mm sockets and a straight screwdriver if you need to pry, a shop light, you will need to get the air out running a while while you add coolant back to level.It's usually the top elbows that leak, if its the 3800 drain coolant into something, go to AutoZone tell them u need the elbows for the 3800, remove your coolant tank, and your alternator, pretty simple, loosen alternator, then slide belt off, then move alternator out of your way, remove the 3 bolts, pull loose, place in new parts, press back in place, then tighten everything back. Discard your bad elbows with bad seals. Check for leaks, if all good, your done.