20 Most Recent 2006 Chevrolet Suburban Questions & Answers

Comes out threw the bottom. Remove the bottom splash guards. Some times the inner fender wells. I work on to many different types to remember. But they all come out the bottom of the car.

2006 Chevrolet... | Answered on Nov 07, 2015


2006 Chevrolet... | Answered on Oct 19, 2014

Disassembly is the easy part. Assembly is where you can get into trouble. I could tell you now how to do it. But if you haven't done any before, You won't understand and assemble it the wrong way. This would cause you headaches. Once you get into taking it apart, things just start to fall apart on it (Gears and clutches just drop out).. You can't watch all of it at the same time. Buy a manual. Or go to alldatadiy.com or Mitchell.com and buy the manual for this. They aren't that hard to do. You can do it, just need some instruction and diagrams/pictures to do it right. Remember you need limited slip additive and the right lude to put in it..Follow the instructions they give you..

2006 Chevrolet... | Answered on Sep 06, 2014

The blower resistor is located near the blower motor, under the glove box. To get to the blower resistor you have to remove a cover box, held on by two 7mm bolts224b2f3b-82a6-441d-92e6-8de7096f4277.jpg7a9dfa9c-7e14-4851-8885-b266d8604beb.jpg

2006 Chevrolet... | Answered on Nov 11, 2013

I would suspect blower resistor first. they are known for melting the wires at the connector. If problem isn't there its more than likely in the control head. Fuses ok?

2006 Chevrolet... | Answered on Feb 03, 2013

Do you loose the memory for the stations too ?
The memory is on a different circuit than the power for the radio, that fuse could be blown.

2006 Chevrolet... | Answered on Jan 23, 2013

does it ever overheat? (waterpump or thermostat)

Possible clog in heater core or pinched heater hose under hood.

If coolant/water is at proper level, and you don't over heat, the later will most likely be the issue.

Heater core is small radiator deep inside under the front passenger dash and is rather hard to access.

If you smell something like coolant inside, this is for sure the issue.

Hope this helps.

2006 Chevrolet... | Answered on Dec 10, 2012

Well there is no relay.
If you have manual control HVAC you have a 30amp and a 40amp fuse for the blower, and an HVAC control module. I think the module is behind the HVAC controls in the dash.
If you have automatic temp controls, you have a processor in addition to the module. The module and the processor both control fan speed.

2006 Chevrolet... | Answered on Sep 03, 2012

Blower resistor/module

2006 Chevrolet... | Answered on Sep 03, 2012

Check your fuses and relays sometimes they give you a spare or just remove one just like it and swap it out. If that doesn't work get to the motor and check the wiring with the switch on and see if you have power if you do replace motor if not check back by the switch and see if you have power there if you do replace switch. If this helps please rate this if it helps or if you run into a problem put a comment down

2006 Chevrolet... | Answered on Dec 23, 2011

Not finding what you are looking for?
Cars & Trucks Logo

92 questions posted

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

85216 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Suburban Chevrolet

  • Suburban Chevrolet

Most Popular Question

blower heater not working

  • Cars & Trucks