20 Most Recent
- Page 5 Questions & Answers
A/C compressor on 95 astro van does not engage at all.
There are a few reasons for the compressor not engaging. Lets start with the most common. low ac gas.A bad clutch on the compressor.Blown fuse.
Let is start with testing for low gas. (134a freon).Locate the dryer. this is on the passenger side of engine compartment. it looks like a tall cylinder, on the top side you will see a switch. unplug switch connector and jump the two terminals in connector with a piece of wire, this is the low pressure or cycling switch. you will be completing the circuit by jumping a wire across the terminals.If the compressor turns on when connectors are jumped then you are low on gas and the system needs recharging.
If the compressor does not urn on then check all fuses, if fuses are good then the next step is to go to compressor and test for power and ground. If you have power and a good ground on the connector to compressor then compressor clutch is bad.A bad clutch will some times blown fuses, so if you replace the fuse because it was blown and it blows again then clutch is bad.
Another test that will help is when you remove the connector from the cycling low pressure switch , test the connector. one wire on the connector should have power when ac is turned on,
Hope this helps let me know what the outcome is. Good day.
I have enclosed a picture of the switch and dryer to help you locate it.If you jump the terminals
on Mar 23, 2012
I need location of the
There are three on each side of the block and three on the back, between the engine and transmission. The ones you can't see on the sides are hidden by the engine mounts.
on Aug 14, 2011
Not finding what you are looking for?