20 Most Recent 2003 Chevrolet Cavalier Questions & Answers


the problem is in the mechanics of the wiper at the firewall (inside undr the vents) the connector to the wiper arm has come loose from the controlling arm (laymen's terms) you'll need to access the workings and re-connect the arm..the access panel is normally held on with a few screws.....make sure the repair will stay connected and is not worn out.. good luck to you....it is about an hour fix...

2003 Chevrolet... | Answered on May 29, 2019


on the front of the shift knob you will see an area that has a metal clip, using a flat tip screwdriver pry out this clip as you pry it out you will see it is a u shape clip, once you remove this clip the shift knob pulls up and off. then just pull up on the center console cover where the indicators are at, this cover just snaps in, the bulb can be access

2003 Chevrolet... | Answered on Dec 20, 2018


Does your car have a security system on it could be enabled to not let car start

2003 Chevrolet... | Answered on Sep 30, 2018


The issue could be something as simple as a wheel speed sensor not registering. The computer should have a code stored to tell you what the issue is. The reason it works fine when you first start the engine is the ABS and Traction system do a self check each time the engine is started. As long as everything passes it gives the green light and the system is active. When the system detects an error after you start moving it gets disabled and this effects other systems. You need to find and repair the error and all should be good.

2003 Chevrolet... | Answered on Feb 13, 2018


Usually caused by a failing dimmer wheel/rheostat.

2003 Chevrolet... | Answered on Jan 13, 2018


Is the check engine light on? If it is check to see if a local parts store offers free code reading. If its a misfire code it should be po001 through 004. This is telling you cylinder 1 is 001 ect. Then you can change the parts on the correct cylinder.

2003 Chevrolet... | Answered on Nov 28, 2017


Hi. If steering fluid is ok I'd look at pump.

2003 Chevrolet... | Answered on Nov 24, 2017


possibly wiring harness fault,sesor wheel installed backwards or an even fire/odd fire engine mismatched components

2003 Chevrolet... | Answered on Nov 21, 2017


Usually the sign of a bad fuel pump check valve that allows fuel pressure to bleed off over night. Try this in the morning. Turn the key to ON for 2-secs, then OFF. Repeat 3 times. Then try to start. If it starts right up, you need a new fuel pump. By turning the key on and off you're filling the fuel lines and building pressure that you lost overnight.

2003 Chevrolet... | Answered on Sep 25, 2017


The front of engine is usually where the serpentine belt is located. The side of the engine toward the front of vehicle is different. I'm not trying to split hairs, Just trying to understand? Is it coming out in the area of the belt?
When you had it on the ramps, was the engine running? One thought is too much crankcase pressure?
There is, the oil filter could leak, oil pan gasket, head gasket. Is there oil in the coolant or coolant in the oil? It's tough to find a leak if it isn't leaking when you check it.

2003 Chevrolet... | Answered on Aug 25, 2017


You take it to a qualified repair shop < some people are just not smart enough to fix cars .
003 Engine Peformance Tests Scan Data Tests

2003 Chevrolet... | Answered on Aug 12, 2017


WINDSHIELD WIPERS


It can be faulty wiper motor or blown wiper control fuse.


Do you hear any kind of noise when you starter the wiper function. If yes then fuse is ok, but issue is wiper motor.

If no movement at all and no noise then its blown fuse or shorted/loose wiper control wiring: -----

For complete troubleshooting i suggest you few helpful links with accurate solutions.

-------------

Click the link below: -------


1993 Ford F350 wipers not working?

http://repairhelpcenter.blogspot.in/2012/02/1993-ford-f350-wipers-not-working.html

------------

How to Replace a Windshield Wiper Motor

http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-windshield-wiper-motor.html

------------

Wipers not working, but hear relay click on Lincoln LS?

http://schematicsdiagram.blogspot.com/2011/12/wipers-not-workingbut-hear-relay-click.html

-----------

Car windshield wiper gets power for movement and stops?

http://schematicsdiagram.blogspot.com/2011/12/car-windshield-wiper-gets-power-for.html

----------

How does cars Windshield Wiper System Works

http://technoanswers.blogspot.com/2011/11/how-does-cars-windshield-wiper-system.html

---------

1997 Honda Protege: Replace Wiper Transmission?

http://technoanswers.blogspot.in/2012/06/1997-honda-protege-replace-wiper.html

----------------

Windshield wiper fluid container leaking?

http://whatisbyme.blogspot.in/2012/05/windshield-wiper-fluid-container.html

-----------------

Where is wiper fuse located on1993 chevrolet suburban

http://technoanswers.blogspot.in/2012/02/where-is-wiper-fuse-located-on1993.html

------------

2002 Toyota Sienna: Wipers and Passenger side Power window stopped working?

http://technoanswers.blogspot.in/2012/04/2002-toyota-sienna-wipers-and-passenger.html

-------------

Complete wiper components replacing details for Acura Car Models?

http://repairhelpcenter.blogspot.com/2011/11/complete-wiper-components-replacing.html

------------

These details will help.

Thanks.

2003 Chevrolet... | Answered on Aug 04, 2017


When you say, hard start, are you saying it cranks good but won't start? If so, have a helper crank it while you visually check for spark at the plugs, if spark everywhere, use a gage and check proper fuel pressure. Also, check fuel injector pulse. Crank the starter intermittently, so it doesn't overheat.
Any applicable trouble codes?
As far as you dash lites, you may have to check ignition switch.

2003 Chevrolet... | Answered on Jul 22, 2017


Could be crank shaft sensor.

2003 Chevrolet... | Answered on Jul 14, 2017


Highly doubtful that a pump will fix a 0 oil pressure problem. This sounds more like worn bearings. Have a shop do a pressurized oil leakdown test before replacing the oil pump. If the bearings pass the test, then try a pump.

2003 Chevrolet... | Answered on Jul 02, 2017


when bleeding system did you depress the pedal very slowly ? if not could have pushed master cylinder past the seal , worth stripping down and checking if the push rod is sealing , could also be the other part to the slave that has failed , hope this helps

2003 Chevrolet... | Answered on Jun 05, 2017


Low or empty brake fluid . No red brake light lite . Brake line corroded maybe , where do you live ? Rust belt USA . Just had a similar problem in a 2005 chevy cavalier . Did you have to stop really fast ?

2003 Chevrolet... | Answered on May 09, 2017

Not finding what you are looking for?
2003 Chevrolet Cavalier Logo

1,387 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Cavalier Chevrolet

  • Cavalier Chevrolet

Most Popular Question

need diagram 2003 chevy cavalier 2 2

  • Cars & Trucks
Loading...